Steps
1. Align the notch on the 2280 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the 2280 solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x3.5) that secures the 2280 solid-state drive to the system board.
4. Place the computer in an upright position.
Next steps
1. Install the
hard-drive
assembly.
2. Install the
riser
card—optional.
3. Install the
processor
fan.
4. Install the
side
cover.
5. Follow the procedure in
Expansion card
Removing the serial port PCIe card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
41