Setting Day And Time - Hunter 42711-01 Installation And Operation Manual

The default for this thermostat setting is in a
12 hour format. You can change the format to
24 hour format by pressing
Program.
The aM/pM indicator will be off when the thermostat is
in 24 hour mode.

Setting day and time:

1. Press
Day/Time
flash)
2. Press or
Up
3. Press
Day/Time
setting.
4. Press
Day/Time
week.
5. Press
Day/Time
You may also press hold/return at any time to return
to the normal display.
SETTingS, ConT.
. (AM/PM and current hour will
to adjust the setting.
Down
again to adjust the minute
again to adjust the day of the
to return to the normal display.
25
and then
Day/Time