Panasonic WX-CC411BP Operating Instructions Manual page 36

Operating procedures
3
Touch [Headsets] button, and then the [ID
Registration] button.
p p The ID registration screen appears.
Note
p p The registered All-In-One Headset or Belt Pack numbers
are displayed in the [Registered Headsets] area. When ID
registration is completed successfully, the ID of the newly
registered All-In-One Headset or Belt Pack is added.
4
Touch the [Start] button.
p p The following pop-up screen is displayed. You cannot
perform other operations during ID registration. To
continue ID registration, touch the [YES] button. To
stop ID registration, touch the [NO] button.
p p Touch the [YES] button to start ID registration mode.
The number of the All-In-One Headset or Belt Pack
that has been registered is displayed.
36
WX-CC411BP_PUQX1028ZAV1_IG.indb 36
5
<For WX-CH450 and WX-CT420>
Press the [POWER] button while holding down
the [T1] button and [T2] button.
<For WX-CH455 and WX-CH457P>
Rotate the microphone boom while holding
down the [T] button and [P] button to turn on
the power.
p p The All-In-One Headset or Belt Pack starts up in ID
registration mode. The "Registration Mode" voice
prompt will be heard from the earphone, and the
power indicator will blink orange.
In ID registration mode, the buttons and indicators
have different functions from those at normal startup.
6
<For WX-CH450 and WX-CT420>
Press the [T1] button.
<For WX-CH455 and WX-CH457P>
Press the [T] button.
p p The All-In-One Headset or Belt Pack searches for a
Center Module that is in ID registration mode. The
"Connecting center module A" voice prompt will be
heard from the earphone, and the lane indicator will
blink orange.
In the case of the WX-CC412BP, after lane A
registration, the "Connecting center module B" voice
prompt will be heard, and the lane indicator will blink
green.
p p When ID registration has been completed successfully,
the "Registration complete" voice prompt will be heard
from the earphone, and then a voice prompt for the
number of the registered All-In-One Headset or Belt
Pack will be heard. The power indicator and the lane
indicator now stop blinking, and light up.
After registrating all of the headset IDs, touch the [Stop]
button on the ID registration screen.
ID registration mode for the Center Module is exited. The
power indicator of the All-In-One Headset or Belt Pack
changes from orange to green.
2022/03/07 11:26:41