Flanger - Arturia TAE VOX Continental-V User Manual

A pop-up menu will show you the available FX choices:
When you select an effect it will appear on the virtual floor below the VOX Continental.
We'll take each of the FX Slot menu choices one at a time, starting from the top.
The first one is labeled Empty. Selecting this option will close the FX pedal and the FX Slot menu,
removing the FX device from the signal path.
But Empty isn't the only option if you just want to hear the sound without the FX unit temporarily.
You'll notice that almost every FX device also has a bypass button, which when clicked will
cause the FX mix to become 100% dry. A red LED indicates when the FX device is on, so when
you bypass the effect the LED will turn off.
The only FX device without a bypass switch is the Wah pedal. That unit is basically a filter, so the
way to remove it from the signal path is to push the pedal all the way forward by clicking the
pedal top and dragging the cursor all the way up. When you reach a value of 100% the pedal is
wide open (bypassed).
One more thing: All FX parameters are MIDI-assignable, which means they "learn" the controllers
on your external USB MIDI device. For information about this process, refer to the section on
"configs".
What follows is a description of each available FX device.

3.6.1 Flanger

ARTURIA VOX Continental V User's Manual -37- 4 USER INTERFACE