Midi Preferences: The Pref Button - Arturia TAE VOX Continental-V User Manual

Table of Contents

Advertisement

Here's another example. Looking closely you'll see a black rectangle around the drawbar being
edited. It has been assigned to a MIDI CC# and will respond to those messages when received.
A black rectangle outlines the edited drawbar. Note the inverted Min / Max values in the MCS window.
Once you have finished linking the controls to your controller, you have completed making a
new config. Be sure to use the Export function described
To close the MIDI Control Setup window and exit learn mode, click the MIDI button again.
3.4.10.3 Minimum / maximum controller ranges
Values for minimum and maximum operational range can be set for each assignable control.
After this the control will still receive the full range of its assigned MIDI CC#, but will scale its
response so these values are spread out within the min / max range of the control.
In other words, if the Min value is set to 50 and the Max value is set to 100:
a MIDI CC value of 0 will result in a value of 50 for the selected VOX V parameter
a MIDI CC value of 127 will result in a value of 100 for the VOX V parameter
a MIDI CC value that falls between 1 and 126 will result in a value somewhere between 50
and 100 on the VOX V parameter.
Note that a "squashed" range such as in the example above means there won't be a 1:1
correlation between the motion of the MIDI controller and the response of the VOX V parameter;
it may take two or more adjacent values of the controller before the VOX V parameter will
change.
It is also possible to invert the Min and Max values so the parameter responds "backward," as in
the picture on the previous page. This comes in handy when dealing with drawbars, if the external
MIDI controller doesn't have a "drawbar" mode.

3.4.11 MIDI preferences: the PREF button

With a fully decked-out VOX Continental organ the organist could play three parts at the same
time: the upper manual, the lower manual, and the pedal board. So naturally, the VOX
Continental V software can respond to three separate MIDI channels simultaneously.
ARTURIA VOX Continental V User's Manual
in section 4.4.10.1
-32-
to back it up.
4 USER INTERFACE

Advertisement

Table of Contents
loading

Table of Contents