Switches; The Effects - Arturia TAE VOX Continental-V User Manual

A similar action is used to edit a rotary control: click on it and drag the cursor up and down. This
will rotate the knob graphic and display the new values in a small window nearby.
3.5.1.1 Coarse vs. Fine adjustments
Normally controls will make coarse adjustments to parameter values. However, they can also
make fine adjustments, allowing for greater precision. This is possible by dragging the cursor while
holding the Control key, or by using the right click first and then dragging the cursor.
To reset the parameter value to its default setting, double click on the knob. This will set it to the
center position immediately (works only on some parameters).

3.5.2 Switches

VOX Continental V has two types of switches. Simply click on these switches to change their state.
Some are the "on/off" style, such as the Bass 8' – 16' switch:
Others allow several choices, such as the Chorus Type switch in the FX:

3.6 The effects

To add one of the effects to the VOX Continental V output, click the arrow to the right of the
words "FX SLOT" at the bottom of the main window.
ARTURIA VOX Continental V User's Manual -36- 4 USER INTERFACE