Table of Contents
Advertisement
Setup
Setup
Entering SETUP MODE
1. Press both the UP and DOWN ARROW buttons
together for three seconds.
NOTE: If a button is not pushed for 1 minute, the control-
ler returns to the start of an OFF cycle.
Programming ON Duration
•
on:Pr, on:CY or on:ti appears on
the display identifying the function
you are programming.
•
The LED below the related symbol
on the controller label also indi-
cates the function.
NOTE: Selection on:Pr, on:CY or
on:ti designates the way the
pump run time is controlled:
•
on:Pr = Pressure Control,
reaching a specific pressure
threshold measured by an
external pressure switch
•
on:CY = Cycle Control, com-
pleting a specific number of
cycles of an external
prox/cycle switch
•
on:ti = Time Control, a spe-
cific duration of time elapses
Pressure Mode (on:Pr) ON Setup
1. Use the UP or DOWN ARROW to
cycle through the on:Pr, on:CY or
on:ti on the display.
2.
When on:Pr displays, press the
ENTER button to lock in the selec-
tion.
3. Pressure control is an ON / OFF
selection only. Not additional pro-
gramming is required.
12
Cycle Mode (on:CY) ON Setup
1. Use the UP or DOWN ARROW to
cycle through the on:Pr, on:CY or
on:ti on the display.
2. When on:CY is displayed, press
ENTER to lock in the selection.
The first number displayed after the
P: Pressure
on:CY is entered, blinks, indicating the device is ready
to program the number of cycles.
3. Program the cycles by pressing the UP or DOWN
ARROW to move up or down through the numbers
0-9.
C: Cycle
4. When the correct first digit is displayed, press the
ENTER button to lock in the selection
The cursor automatically moves to the second number
field and flashes.
NOTE: The cycle is a 2-digit number. A leading zero (0)
must be entered in the first field if the number of cycles
T: Time
is fewer than 10.
5. Use the UP or DOWN ARROW to scroll through the
numerals 0-9 until the desired number appears in
the second cycle number field.
6. Press the ENTER button to lock in the selection.
Time Control (on:ti) ON Setup
1. Use the UP or DOWN ARROW to
cycle through the on:Pr, on:CY or
on:ti on the display.
3A2960A
Advertisement
Table of Contents
