Leica ComGate10 User Manual page 21

Insert SIM card
Leica ComGate10, Operation
1 7
2
6
006181_002
Step Description
1. Open the SIM card slot with a screw driver.
2. Remove the cover of the SIM card slot.

The small screw of the SIM card slot must not fall into the ComGate10. In
order to protect the ComGate10 from damage, the screw must be removed
from the internal of the ComGate10 and the ComGate10 must be opened.
Only Leica Geosystems authorised service centres are entitled to open the
product. Otherwise the warranty expires immediately.
3. Open the SIM card holder.
4. Insert a SIM card from your mobile provider in the SIM card holder.
5. Close SIM card holder.
6. Close the cover of the SIM card slot.
7. Close/lock the SIM card slot with a screw driver.

Make sure that the PIN protection of the SIM card is disabled. To disable the
PIN protection of the SIM card use a mobile phone. Insert the SIM card into
the mobile phone. Disable the PIN protection in the settings of the mobile
phone.
4
3
5
21