Option: Monitoring Flow Rate - mru OPTIMA User Manual

12 Option: Monitoring flow rate

The flow rate is continuously monitored. In the event of an error, the
following message appears in the display:
If the flow rate is too low, this message is displayed every 8 seconds.
Folgende Fehler können die Ursache sein:
• Filter clogged
• Hose line kinked
• Pump defective
It is recommended to check the filter elements.
If these filter elements are OK, please contact the customer service.
MRU GmbH, D-74172 Neckarsulm
USER MANUAL OPTIMA
90 / 110