Maintenance - Husqvarna 350iB Operator's Manual

Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.

Maintenance

Clean the outside of the machine with a clean and dry cloth. Never use
water.
Keep handles dry, clean and free from oil and grease.
Make sure that the power button works correctly and is not damaged.
Make sure the power trigger is functioning properly with regard to
safety.
Check that nuts and screws are tight.
Check that the battery is intact.
Check the battery's charge.
Check that the release buttons on the battery works and locks the
battery into the machine.
Check that the battery charger is intact and functional.
Check that all connections are intact and free from dirt.
Check the connections between the battery and the machine and also
check the connection between battery and the battery charger.
To do a check of the air intake
1. Make sure that the air intake is not blocked.
14
Maintenance
Before you do any
Maintenance schedule
WARNING:
before you do maintenance.
The following is a list of the maintenance steps
that you must do on the product.
2. Stop the product and remove leaves or
unwanted material if it is necessary.
CAUTION:
decreases the blowing capacity of
the product and increases the work
temperature of the motor. If the
motor becomes too hot, it can result
in motor failure.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
Remove the battery
Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
A blocked air intake
1776 - 002 - 09.03.2022
X