Project Source H5-1190D-2A2C Manual page 6

ASSEMBLY INSTRUCTIONS
6. Insert top caps (DD) into the openings
at the top of top back tubes (B).
Hardware Used
DD
Top cap
7. If additional stability is required,
hardware is provided to secure the unit
to the wall. On the wall, drill a hole 1/4 in.
diameter. Tap the wall anchor (GG)
into the wall with a hammer. Secure the
unit by using mounting bracket (EE)
and mounting screw (FF).
Hardware Used
EE
Mounting bracket
FF Mounting screw
Wall anchor
GG
6
x 2
7
x 1
x 1
x 1
DD
6
EE
FF
GG