Project Source H5-1190D-2A2C Manual page 5

ASSEMBLY INSTRUCTIONS
4. Attach top front tubes (A) and top back
tubes (B) to the middle tubes (C). Using
screws (AA), secure the remaining side
tubes to the top front tubes (A), top back
tubes (B) and middle tubes (C).
Hardware Used
AA
Screw
5. Use screws (AA) to secure the wire
shelves (H) and two back supports (F)
to the completed side assemblies.
Hardware Used
AA
Screw
Note: You may need to attach the back
supports (F) after placing the unit in the
desired location to go around plumbing.
x 6
x 12
4
5
F
5
B
H
F
A
G
AA
C
AA