Automation Setup For Usl Dax Devices - GDC SR-1000 Installation Manual

12. AUTOMATION SETUP

12.7 Automation setup for USL DAX devices

The SR-1000 supports automation for USL DAX sound processor. Follow the steps below to
configure a USL DAX device in the server automation interface.
1. Under the Automation tab in the menu, click the Device sub-tab.
2. On the left column, click create.
3. Select USL-DAX as the device type. Enter the name of the USL DAX device, and click
OK.
4. Enter the IP address of the USL DAX device.
5. Click Save to save the settings.
INSTALLATION MANUAL FOR SR-1000
STANDALONE INTEGRATED MEDIA BLOCK™
Figure 42: USL DAX device setting
- 36 -
th
February 07 , 2022