Christie Series 2 Projector - GDC SR-1000 Installation Manual

7. SERIES 2 PROJECTOR SETUP
To use the SR-1000 for content playback, the INPUT source of the projector macros must be set
to IMB.

7.4 Christie Series 2 Projector

In order to configure a Christie Series 2 projector to work with the SR-1000, the following steps
must be taken:
1. Switch on the projector.
2. Log in to the [Marriage] account on the projector TPC. Select [Menu] → [Login] (as
shown in Figure 22).
3. Enter Username as [marriage] and its password and click [Login] button (as shown in
Figure 23).
INSTALLATION MANUAL FOR SR-1000
STANDALONE INTEGRATED MEDIA BLOCK™
Figure 22: Marriage account
Figure 23: Marriage account login
- 21 -
th
February 07 , 2022