Advertisement
Quick Links
THE GANGING STRAP CONSISTS OF A "FIGURE 8" SHAPE WITH VELCRO ON BOTH SIDES OF ONE END.
IT ATTACHES TO THE STEM OF THE GLIDES USED ON THE CLARETTE SEATS AND OTTOMANS.
NOTE: REMOVE THE SMALL METAL SPACER FROM THE GANGING STRAP.
THE WASHER, METAL SPACER, AND MOUNTING SCREW INCLUDED IN THE KIT ARE NOT NEEDED.
01
STEP
CAREFULLY TURN THE SEAT/OTTOMAN ON ITS SIDE.
UNSCREW THE GLIDE FROM THE SEAT/OTTOMAN. PUSH GLIDE STEM THROUGH THE HOLE OF THE GANGING STRAP
MAKING SURE THAT THE "THIS SIDE UP" LABEL IS FACING UP. SCREW GLIDE BACK ON THE SEAT/OTTOMAN.
REPEAT UNTIL THE DESIRED AMOUNT OF GANGING STRAPS ARE ATTACHED TO THE SEAT/OTTOMAN.
LifeWorkEtc.com
800-634-9514
PN 3385780, Rev -
CLARETTE GANGING ASSEMBLY
GANGING STRAP
GLIDE STEM
GLIDE
Advertisement
Related Manuals for ETC CLARETTE GANGING
Summary of Contents for ETC CLARETTE GANGING
- Page 1 CLARETTE GANGING ASSEMBLY GLIDE STEM GANGING STRAP GLIDE THE GANGING STRAP CONSISTS OF A “FIGURE 8” SHAPE WITH VELCRO ON BOTH SIDES OF ONE END. IT ATTACHES TO THE STEM OF THE GLIDES USED ON THE CLARETTE SEATS AND OTTOMANS.
- Page 2 CLARETTE GANGING ASSEMBLY STEP REPEAT STEP 1 ON ALL SEATS/OTTOMANS THAT ARE TO BE GANGED. TO USE THE GANGING STRAPS, MOVE THE SEATS/OTTOMANS INTO POSITION NEXT TO EACH OTHER. SEATS/ OTTOMANS MUST BE POSITIONED SO THE STRAPS ON ONE SEAT/OTTOMAN CAN REACH THE ATTACHMENT POINTS OF THE STRAPS ON ANY ADJACENT SEAT/OTTOMAN.