FLASHFORGE 3D PRINTER Creator 3 Pro Quick Start Manual page 8

8. Filament feeding operation: Click the [Tools]-[Filament] button on the screen in turn,
and set a reasonable heating temperature according to the required temperature value
of the material; Operate according to the screen prompts, and wait for the nozzle to
extrude uniform filament smoothly.
Filament unloading operation: Click [Unload], press down the filament pressing plate
after the extruder temperature heating is completed, pull out the white filament guide
tube, and pull out the filament upward quickly and then filament unloading is completed.
Withdraw
Filament
Guidetube
06
Push filament
down through
for 3 seconds
Press here