Buttonholes
1.
Install the presser foot
2.
for buttonholing.
HZL-30Z
HZL-60
Install it so that its scale comes
to the left-hand side.
5.
Select a buttonhole that matches your
purpose.
HZL-30Z
HZL-60
Step of procedure for making a choice of pattern to be
sewn.
17
All manuals and user guides at all-guides.com
CAUTION:
Make sure to turn off the machine before changing the presser foot.
3.
Set the stitch length.
HZL-30Z
0.2 ~ 1
Mark the fabric to indicate
HZL-60
the buttonhole place-
ment.
0.2 ~ 1
Adjusting stitch
balance of
buttonhole stitching.
The adjusting screw is
located on the under
handwheel and can be
turned with a screwdriver
through the hole.
4.
Push the slide and set the
Mark the fabric.
mark.
HZL-30Z
Mark
HZL-60
Lower the buttonhole foot so that the
mark is at the center of the needle
hole in the foot.
Incorrect
Adjustment
Mark
The slide
Push
Mark
Push
Correct