JUKI HZL-30Z Instruction Manual page 11

All manuals and user guides at all-guides.com
Automatic Needle Threading
2.
all the way down and a hook
1.
Push the threading lever will go through the eye of the
down. needle.
HZL-30Z
(A)
HZL-60
(A)
Lower the threading lever Pass the thread in front of the
needle and below the hook.
and place the thread onto
(A).
Pulling Up The Bobbin Thread
1.
Hold the needle thread lightly with
the left hand and turn the handwheel
toward you until the needle enters the
needle plate.
HZL-30Z
HZL-60
Continue turning the handwheel while
holding the needle thread until the needle
rises.
* Check to be sure that the needle is in its highest position.
Push the threading lever
3.
threader and it will return to
its original position.
HZL-30Z HZL-30Z
Hook
HZL-60 HZL-60
Hook
2.
Turn the handwheel
toward you.
HZL-30Z
HZL-60
Undo the loop with your finger.
4.
Slowly release the needle
that is at the back of the
needle out about 4".
HZL-30Z
HZL-60
3.
Pull both the needle and bobbin
threads out by 10 cm.
HZL-30Z
HZL-60
Pull the loop of thread
10