Table of Contents
Advertisement
7102
User's Guide
Limitations and Disclaimer
The information in this manual regarding fluids is only to be used as a general guide you choose a fluid.
Though every effort has been made to provide correct information, we cannot guarantee accuracy of
data or assure suitability of a fluid for a particular application. Specifications may change and sources
sometimes offer differing information. Fluke Calibration is not liable for any personal injury or damage
to equipment, product, or facilities that result from the use of these fluids. The user of the bath is
responsible and must collect correct information, exercise proper judgment, and ensure safe operation.
Do not operate near the limits of certain properties such as the flash point or viscosity as this can
compromise safety or performance. Consider the safety policies of your company regarding flash
points, toxicity, and such issues. You must read the MSDS (material safety data sheets) and act
accordingly.
-100 °C
Silicone Oil
5017
Silicone Oil
PP
5014
Silicone Oil
PP
5013
Silicone Oil
PP
5012
Silicone Oil
PP
5010
HFE 7500
5023
Halocarbon
10 CS
5019
Mineral Oil
5011
Water
FR (Pure)
Methanol
Ethanol
Ethylene Glycol
(50/50 with H 0)
5020
Dynalene HF/LO
5022
Bath Salt
5001
Legend
18
Figure 5. Chart of Various Bath Fluids
0 °C
100 °C
PP
10 CS
10 CS
10 CS
FL 133 °C
10 CS
EP 100 °C
EP 1
10 CS
10
FR
BP
FL 12 °C
BP
10 CS)
FL 16 °C
FR
10 CS
BP
10 CS)
FL 60 °C
FR
Shaded area represents usable range of fluid start at
50 centistokes. Lighter shading represents decreasing
viscosity, while vaporization and decomposition
increase.
Black area represents liquid range with excessive
viscosity.
Range over which a fume hood is recommended.
200 °C
300 °C
10 CS
FL 302 °C
10 CS
FL 280 °C
FL 232 °C
FL 211 °C
FL 177 °C
400 °C
500 °C
Decomposition Starts
BP- Boiling Point
CS - Centistokes
EP - Evaporation Point
(Fluid Loss due to evaporation)
FL- Flash Point
FR Freeze Point
PP-Pour Point
600 °C
Advertisement
Table of Contents
