Table of Contents
Advertisement
1. Introduction
Thank you very much for your purchase of the Hitachi BE-IR30/31 Black and White Camera
Module.
Prior to using this camera , read this manual carefully.
2. General
The BE-IR30/31 is a monochrome camera module featuring sensitivity in the near infrared
spectrum using a 1/3-inch size CCD imaging device. Resolution is outstanding, while the very
small size provides optimum suitability for incorporation into equipment where space is limited.
Model coding
BE-IR3
*Type C is mount only. Specify at time of order when requiring pinhole lens,
CS or C mount adapter
3. Composition
1) Black and white camera module ･･････････････････ 1
2) Interface cable ･････････････････････････････････ 1
Note : The standard accessory cable is 300 mm signal conductor.
4. Specifications
1)
Imaging device
No. of pixels
No. of effective pixels
Pixel pitch
BE-IR30 / 31
Signal system
Optical system
Synchronization
Different length cable requires shielding to avoid external noise.
N: EIA
P: CCIR
A: Without lens mount
B: With lens mount and board lens
C: With pinhole lens mount*
0: Internal sync
1: External sync
1/3 inch interline CCD
EIA : 811(H)×508(V)
CCIR : 795(H)×596(V)
EIA : 768(H)×494(V)
CCIR : 752(H)×582
EIA : 6.35(H)×7.4(v) m
CCIR : 6.5(H)×6.25(V) m
2
Advertisement
Table of Contents
