Lionelo Levi Simple User Manual page 14

(Q). See: fig. 26
•
Pull both belts through slits in the child safety seat backrest.
•
Pull the buckle of the child safety seat belts through the hole in the
fabric covering. See: fig. 27
•
Pull the metal buckle through both holes in the child safety seat.
See: fig. 28
B. How to install 5-point safety belts.
•
Pull the metal buckle through the hole in the fabric covering. Next
pull the buckle through both holes in the child safety seat. See: fig. 29
•
Put the shoulder belts (H) of the child safety seat in two slits (8)
located in the child safety seat backrest. See: fig. 30
• Attach belt tips to the belt connector (Q). See: fig. 31.
Note! After you have installed 5-point belts, make sure the child safety
seat shoulder belts are not twisted.
3.How to assemble the child safety seat in the car
3.1 Group I (9-18 kg), the child secured with child safety seat belts.
•
Place the child safety seat on the car seat, make sure the product
adheres to the backrest.
•
Take the car seat belts out. Pull the shoulder part of the belt through
the guide between the headrest and child safety seat backrest.
Carry the hip belt through the red guide, below the elbow rest (E).
•
Pull the shoulder belt with hip belt through the belt guide in the
backrest (P) (from the front to the back of the product). Pull further
at the back, behind the child safety seat casing.
•
Next pull the belt through the second guide in the backrest, marked
in red (P) (from the back to front of the product). See: fig. 18 and 19
•
Pull both belts under the second elbow rest of the child safety
seat (E).
• Fasten the belts until you can hear a distinctive „click". See: fig. 20
EN ‑ 14 ‑