Lionelo Levi Simple User Manual page 10

In case of any doubts, please consult the product manufacturer or retailer.
It is fit for installation only when approved vehicles are equipped with
three-point safety belts with a retractor which have been granted
a certificate of approval in accordance with the regulations UN/ECG
no. 16 or other equivalent norms.
2. How to use the child safety seat
Important
•
Please read this manual before you use the product and keep it
for future reference. The manual can help you properly assemble
the child safety seat. A wrong assembly may pose a threat to your
child's health. The manufacturer is not held responsible for potential
hazards arising from wrong assembly of the product.
•
Hard elements and plastic parts of the child restraint system must
be placed and installed in a way that they do not get trapped by
sliding seat or vehicle door under regular conditions of use.
•
Any belts which attach the child restraint system to the vehicle must
be tight, the child securing belts must be adapted to its body, the
belts must not be twisted.
•
Make sure the hip belts go low so that the pelvis is properly secured.
•
If the product is subject to sudden loads during an accident, please
replace it.
•
Do not modify the child safety seat or install any additional elements,
unless relevant authorities have agreed on it. A failure to follow the
manual supplied by the manufacturer may pose a threat to the user.
•
Protect the child safety seat against sunlight. Otherwise the product
may be too hot for your child's skin.
•
Never leave the child in the child restraint system unattended.
•
Luggage and other items which may pose a bodily injuries in case
of collision must be properly secured.
EN ‑ 10 ‑