Toshiba Vm Series Instruction Manual page 22

Chapter1 On Installing typeS Controller
(5). Operation mode switch (refer to p.6 ※3)
(6). Battery
(7). USB 2.0 type B connector (refer to p.6 ※1)
(8). USB 3.0 connector (refer to p.6 ※5)
(9). USB 2.0 connector (refer to p.6 ※5)
(10). Display connector
(11). Ethernet connector (EN-A) (refer to p.6 ※2)
(12). Ethernet connector (EN-B) (refer to p.6 ※4)
(13). Battery Cover
4
6F8C1645
This switch to switch the operation mode of the controller.
A battery used for memory backup.
Available for dedicated connector for communicating with nV-Tool via USB.
Connect a USB 2.0 or USB 3.0 compatible device.
It is for the computer function of the CPU module.
Connects USB 2.0 compatible device.
For the computer function of the CPU module.
Connects DisplayPort compatible display.
For the computer function of the CPU module.
An RJ-45 connector.
10/100 /1000Mbps Ethernet cable connection supports.
Each has an Ethernet status indicator LED (see Table.1.2).
Available for both controller function and computer function.
Open this battery cover when replacing (6) battery or connecting USB cable to (7)
the USB2.0 typeB connector.