Table of Contents
Advertisement
Figure 16: Radar Manager Main Screen
In order to assign a different IP to a radar, right click on the row containing the device details,
and choose "Assign IP".
An "Update IP" window will be opened as shown in Figure 15. The window shows the MAC
of the selected device and the current IP assign to it. The user is prompted to type in the
new IP address. When done click set.
The new IP will be updated in the device table of the main screen within a few seconds,
when the next broadcast message arrives from the device. It is recommended to wait and
check that IP was indeed updated successfully.
This IP will be retained in flash memory on the radar and will not be erased upon reset. It can
be re-configured using the radar manager tool whenever needed.
Figure 17: Radar Manager - Choosing a fixed IP
Page 22
© Copyright 2017, Magos Systems. All Rights Reserved
Advertisement
Table of Contents
