Table of Contents
Advertisement
RJ-BOX FULL
RJ-BOX MISSING
PRINT FAIL
CAM TPH ERROR
CAM PINCH ERROR
CAM FLIP ERROR
CAM MAG ERROR
CHECKSUM ERROR
NVRAM R/W ERROR
NVRAM CRC ERROR
CMD SEQUENCE
ERROR
The rejected box is full of cards
The rejected box is not placed in the
proper position
The printing process fails.
The error occurs in the mechanism.
The version of the firmware is not
correct.
The error occurs due to memory
inside the card printer.
The error occurs due to a command
sequence.
Please remove the invalid cards from the rejected box
or follow the instructions from the LCD display and
press [NEXT] → [IGNORE THE ERROR] to clear
this error condition.
Please make sure the rejected box is installed
properly. Or please follow the instructions on the
LCD display and press [NEXT] → [IGNORE THE
ERROR] to clear this error condition.
Please restart the card printer. If the error message
still occurs, please contact your nearest HiTi
distributor or HiTi customer service department.
Website:
http://hi-ti.com
If the error message still occurs, please contact your
nearest HiTi distributor or HiTi customer service
center.
Website:www.hi-ti.com
Please restart the card printer. Or download the latest
version of Firmware from the HiTi website and
follow the instructions from the HiTi Card Printer
User Manual to re-install the firmware.
If the error message still occurs, please contact your
nearest HiTi distributor or HiTi customer service
center. Website:
Please restart the card printer. If the error message
still occurs, please contact your nearest HiTi
distributor or HiTi customer service center.
Website:http://hi-ti.com
Please restart the card printer or download the latest
Firmware from the HiTi website and follow the
instructions from the HiTi Card Printer User Manual
to re-install the firmware.
If the error message still occurs, please contact your
nearest HiTi distributor or HiTi customer service
center.
Website:www.hi-ti.com
44
http://hi-ti.com
www.hi-ti.com
Advertisement
Table of Contents
