Table of Contents
Advertisement
[
Magnetic Encoding
Magnetic Encoding Data: Input Magnetic Data directly. When you are not using the
A
database, you can manually enter data for the encoding of the magnetic stripe.
There are three tracks within the magnetic stripe.
alphanumeric characters and other simple symbols. The second and the third
tracks accept numeric characters only.
When you mark □Track 1, □Track 2, □Track 3 for data encoding, the function of
□Using Database will be disabled. When you mark □Using Database for data
encoding, □Track 1, □Track 2, □Track 3 will be disabled.
B
Using Database: Apply database for encoding. Browse: browse the path for a
database. Encoding Data Start From: Decide which data to start encoding from a
database.
Notice: The database function is for the user who needs encoding by database but
※
is not using Card Desiree CS as their application program.
C
Encoding Port: The information about the connection port.
D
Times of Retrying: After finishing encoding, the encoder will automatically read the
data for verification purposes. If the reading fails, the device can be set to repeat
the process according to the setting of the user.
Database Sample: There is a Database Sample for your reference. The format of a
E
database must match this sample. After expressing this button, it will show the data
samples as follows:
1 ABCDEFRG
2 12345678
3 2468024680
]
A
B
C
26
D
E
The first track includes
www.hi-ti.com
Advertisement
Table of Contents
