Table of Contents
Advertisement
Card jam in card
path
Card jam in the device.
Card
jam
in
a
flipper
Card jam in rejected
Card jam in the rejected box
box
R/J Box full
The rejected box is full of cards
The rejected box is not placed in the
R/J Box missing
proper position
Please remove the card by following the instructions on
the LCD monitor of the printer before continuing the
print job. Please press [OK] to get step by step
instructions.
1. OPEN THE DOOR: Open the ribbon door to see
whether the card and the ribbon are sticking together or
not.
2. TAKE OFF THE RIBBON: Remove the ribbon.
There are three options jammed card removal. Please
press [<] or [>] to select one of these options:
AUTO REMOVE CARD: Press [OK], the card
printer will show "MOVING CARD" and remove
the card automatically.
SEMI-AUTO REMOVAL: Press [OK]. The
LCD display will show "CONTROL BUTTON",
press [<] or [>] to remove the card. After
removing the cards, press [OK] to clear the error
message.
MANUAL REMOVAL: Press [OK], the LCD
display will "REMOVE BY HAND". After
removing the card, press [OK] to clear the error
message.
※NOTICE！During "SEMI-AUTO REMOVAL"
or the "MANUAL REMOVAL" process, please DO
NOT put your hands into the card printer.
※
！ If the LCD display does not show
NOTICE
"NEXT" below the "CARD JAM" message, please
empty
the
rejected
troubleshooting process on the computer monitor.
※
！If the card printer is
NOTICE
printing on either side of a card, and the "Card jam"
error occurs after printing the first side printing, then
please follow the previous instructions to remove the
card and check if the cleaning roller is installed
properly. If not, please follow the instruction in"1-4
Install Cleaning Roller" to install the cleaning roller.
If the LCD display does not show "NEXT" below the
"CARD JAM" message, please empty the rejected box
and then continue the troubleshooting process.
Please empty the rejected box or follow the instructions
from the LCD display and press [NEXT] →[IGNORE
THE ERROR] to clear this error condition.
Please check if the rejected box has been properly
installed or please follow the instruction on the LCD
display and press [NEXT] → [IGNORE THE ERROR]
to clear this error condition.
40
box
and
continue
www.hi-ti.com
the
Advertisement
Table of Contents
