Hi-Touch Imaging Technologies CS-310 User Manual page 20

※When you select the YMCKO ribbon as your ribbon type, several options for Resin K
will be available.
Disable
Always on
Text only
Disable when
color printing
Black/White
Resin Dither
NOTE:
1. Graphical Device Interface, a Windows standard for dividing the images to many
graphical objects and transmitting them to output devices, such as monitors and
printers.
2. It is recommended to select "Disable doing color printing" if you are not going to use
Card Désirée CS to print.
When you select Resin K ribbon or KO ribbon as your ribbon type, then 2 options for
※
the Resin K / KO ribbon will be available: Black/White and Resin Dither.
Black/White
Resin Dither
The "Resin K" within YMCKO ribbon will not be applied to print
the black section and the black (RGB = 0, 0, 0) in graphical
objects. It means the color in black (RGB = 0, 0, 0) will always be
composed by Y, M and C.
The "Resin K" within the YMCKO ribbon will be applied to print
all of the black (RGB = 0, 0, 0) in the images.
The "Resin K" within YMCKO ribbon will be applied to print the
graphical object- "Text" which is transmitted by GDI command,
but will not be applied to the black part in the images or the black
(RGB = 0, 0, 0) of the graphical objects transmitted by the GDI
command. For example, the Barcode is transmitted by the GDI
command, but this option will not apply to Resin K within the
YMCKO ribbon to the Barcode.
The "Resin K" within the YMCKO ribbon will be applied to print
doing
all the black (RGB = 0, 0, 0) graphical objects that are
transmitted by the GDI command, but will not be applied to all
the black (RGB=0, 0, 0) parts in the images.
The "Resin K" ribbon will represent the color graphic/texts in
black (RGB=0, 0, 0) and white printing style.
Resin Dither applies different density of black-white mixing
to transfer color graphic to different black level. If the text is
the black (RGB=0, 0, 0) graphical object transmitted by
GDI, then the text will not be shown by mixing color, but by
the actual contents.
The "Resin K" ribbon will represent the color graphic/texts in black
(RGB=0, 0, 0) and white printing style.
Resin Dither applies different density of black-white mixing to transfer
color graphic to different black level. If the text is the black (RGB=0,
0, 0) graphical object transmitted by GDI, then the text will not be
shown by mixing color, but by the actual contents.
20
www.hi-ti.com