Cisco IG21 Series Installation Manual page 14

Cisco IG21R Rugged IoT Gateways Panels
6
7
8
9
10
11
Cisco IG21 IoT Gateways, Cisco IG21R Rugged IoT Gateways, and Cisco IG31R Rugged IoT Gateways Hardware Installation Guide
10
LTE LED. Provides information about cellular
connectivity as follows:
• Off: One or more of the following conditions
exists:
• Device is powered off
• SIM card is not installed in the device
• SIM card is not activated
• SIM is not properly inserted
• Device is not receiving a cellular signal
• Flashing green: Device is receiving a cellular
signal, but the cellular signal is weak (RSSI is
less than –90 dBm)
• Solid green: Device is receiving a strong cellular
signal (RSSI is greater than –90 dBm)
USB Type-A port.
Gigabit Ethernet WAN port.
The LED on this port provides the following
information:
• Off: Device is not connected to the WAN
• Solid green: Device is connected to the WAN
• Flashing green: Device is transmitting or
receiving network traffic
Gigabit Ethernet LAN port.
The LED on this port provides the following
information:
• Off: Device is not connected to the WAN
• Solid green: Device is connected to the WAN
• Flashing green: Device is transmitting or
receiving network traffic
RS-232 Serial port. Reserved for future use.
SIM slots and Reset button cover. See the following
sections:
• Installing a SIM Card
• Rebooting or Resetting a Gateway, on page 37
Product Overview