Surface Mounting With Wall Brackets - Cisco IG21 Series Installation Manual

Installing the Gateway

Surface Mounting with Wall Brackets

Figure 18: Removing a Gateway from a DIN Rail (IG21R Shown)
1. Push the gateway up to compress the spring against the DIN rail.
2. Rotate the gateway away from the DIN rail and lower it to disengage it from the rail.
Surface Mounting with Wall Brackets
You can mount the IG21, IG21R, and IG31R gateways on a flat vertical surface such as a wall by using the
two mounting brackets, provided. These brackets attach to the back of the gateway, then attach to the mounting
surface.
CAUTION: If you are mounting the device on drywall, use four hollow wall anchors to secure the mounting
brackets to the surface.
To mount the device on a vertical surface by using mounting brackets, follow these steps:
Cisco IG21 IoT Gateways, Cisco IG21R Rugged IoT Gateways, and Cisco IG31R Rugged IoT Gateways Hardware Installation Guide
25