Mounting Kits Contents
Mounting Kits Contents
The IG-R Mounting Kit and the Wall Mount Kit include items needed to mount a gateway on a DIN rail or
a flat vertical surface. To obtain these kits for your gateway model, contact your Cisco representative.
The IG-R Mounting Kit for the gateways includes the following items:
Item
DIN rail bracket
Adapter plate
M3 6mm countersink screws
M4 6mm panhead screws
M4 6mm countersink screws
The Wall Mount Kit for the gateways includes the following items:
Item
Mounting brackets
M4 6mm panhead screws
DIN Rail Mounting
Mount the gateway on a DIN rail by installing a DIN rail bracket on the gateway and then attaching the bracket
to a DIN rail.
Installing the DIN Rail Bracket on Cisco IG21 IoT Gateways
IG21 Gateways uses the DIN rail bracket to mount on a rail horizontally. The DIN rail bracket attaches to the
back of the gateway.
To install the DIN rail bracket on an IG21, see
page 21
Cisco IG21 IoT Gateways, Cisco IG21R Rugged IoT Gateways, and Cisco IG31R Rugged IoT Gateways Hardware Installation Guide
20
and perform the following steps.
Quantity
1
1
2
4
2
Quantity
2
4
Figure 14: Attaching the DIN Rail Bracket to the IG21, on
Installing the Gateway
Need help?
Do you have a question about the IG21 Series and is the answer not in the manual?