Inspection, Maintenance, And Cleaning; Please Read The Following Carefully - Central Machinery 95668 Set Up And Operating Instructions Manual

INSPEcTION, MAINTENANcE, AND cLEANINg

1. cAUTION! Always make sure the Power Switch (5) of the Wood Shaper is
in its "OFF" position and the unit is unplugged from its electrical outlet prior to
performing any inspection, maintenance, or cleaning procedures.
Before each use, inspect the general condition of the Wood Shaper. Check
2.
for misalignment or binding of moving parts, cracked or broken parts, damaged
electrical wiring, and any other condition that may affect the safe operation of
the machine. If abnormal noise or vibration occurs, have the problem corrected
before further use. Do not use damaged equipment.
3. To clean, use compressed air to blow off any wood shavings, dirt, and debris.
Use a clean cloth and mild detergent to wipe off exterior of machine. Do not use
solvents. Do not introduce liquids to any electrical part of the unit.
4. To store, keep the machine in a clean, dry, safe location out of reach of children
and other unauthorized people.
5. cAUTION! All maintenance, service, or repairs not mentioned in this
manual must only be performed by a qualified service technician.

PLEASE READ THE FOLLOWINg cAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.
THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 95668 For technical questions, please call 1-800-444-3353
REV 07j
PAGE 25