Table of Contents
Advertisement
Electrical Requirements
Spindle Diameter
Spindle Thread
Spindle Travel
Router Collets
Maximum Cutting Diameter
Table Size
Footprint
Miter Guide
Fence Dimensions
Overall Dimensions
Gross Weight
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.
1.
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2.
Do not operate the Wood Shaper in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power equipment creates
sparks which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating power
equipment. Distractions can cause you to lose control. Protect others in the work
SKU 95668
For technical questions, please call 1-800-444-3353
PRODUcT SPEcIFIcATIONS
110 VAC / 60 Hz / 10.54 Amps (With Load)
Motor Size: 1 HP / Single Phase
Motor RPM: 3450
Spindle Speed: 11,000
Power Cord Length: 70"
Power Cord Specifications: SJT 16 AWG x 3C
Plug Type: 3 Prong / Grounded
1/2"
12mm x 1.5 pitch, fine thread
7/8"
¼" and ½" (included)
2-7/8"
24" Wide x 19" Deep
18-7/8" Wide x 16-5/8" Deep
0 ~ 60° Left to Right
9/16" Long x 11-3/4" Wide x 2-3/4" High (Qty. 2)
26-1/8" Long x 27-1/2" Wide x 36-1/2" High
187.5 Lb.
SAVE THIS MANUAL
gENERAL SAFETY RULES
READ AND UNDERSTAND ALL INSTRUcTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUcTIONS
WORK AREA
WARNINg!
REV 10d
PAGE 2
Hide quick links:
Advertisement
Table of Contents
