Table of Contents
Advertisement
No. Meal
09 Joint of veal, lean
E.g. tenderloin or eye
10 Pork neck joint
Boned, seasoned
24.3 Preparing food for the programme
Use fresh and, ideally, chilled food.
Weigh the food.
1.
The weight of the food is required in order to cor-
rectly set the programme.
Add the food to the cookware.
2.
Place the cookware onto the wire rack.
3.
Always place the ovenware into the cooking com-
partment without preheating it.
24.4 Setting a programme
The appliance selects the optimal type of heating, tem-
perature and cooking time. All you need to do is set
the weight.
Notes
¡ You can set the weight only in the intended range.
¡ After the programme starts, you can no longer
change the programme and the weight.
Use the function selector to set
1.
Use the temperature selector to set
2.
25 Childproof lock
Secure the appliance to prevent children from accident-
ally switching it on or changing the settings.
Notes
¡ The option to set the childproof lock can be activ-
ated in the Basic settings → Page 21.
¡ After a power cut, the childproof lock will no longer
be active.
Cookware
Adjustment
weight
Roasting dish with
Weight of meat
lid
Roasting dish with
Weight of meat
glass lid
.
.
Add liquid
Cover the
bottom of the
roasting dish,
and add up
to 250 g ve-
getables, if
required.
Cover the
bottom of the
roasting dish,
and add up
to 250 g ve-
getables, if
required.
Use
or
to set the required programme.
3.
Press
.
4.
Use
or
to set the weight of your food. Always
5.
set the next higher weight.
The display shows the calculated cooking time.
‒
You cannot change the cooking time.
On some programmes, you can delay the end
‒
time using .
→ "Setting the end time", Page 25
To change the programme, press
‒
a After a few seconds, the programme starts and the
cooking time counts down.
a If the programme has ended, an audible signal
sounds and the display shows the cooking time as
zero.
When the programme ends:
6.
Press any button to end the signal prematurely.
‒
To set a cooking time for further cooking,
‒
press . The appliance will resume heating us-
ing the programme settings.
When the dish is ready, switch off the appliance.
‒
25.1 Activating and deactivating the
childproof lock
Requirement: The function selector must be set to the
off
position.
To activate the childproof lock, press and hold the
▶
button until
appears in the display.
To deactivate the childproof lock, press and hold
‒
the
button until
Childproof lock en
Shelf
Information
posi-
tion
2
Do not sear the meat
beforehand.
2
Do not sear the meat
beforehand.
.
goes out in the display.
27
Advertisement
Table of Contents
