Table of Contents
Advertisement
IV. Solid Tyre
1. Turn off power to the joystick.
1
2. Ensure the unit is in drive mode.
3. Prop up the side of the unit being serviced.
Tools Required:
- Imperial and Metric Socket Set
- Calibrated Torque Spanner/Wrench
- Phillips Screwdriver
4. Remove the drive wheel. See Section III.
5. Remove the 4 nuts that secure the wheel to the hub.
6. Remove and replace the solid tyre.
7. Re-assemble the rim with the solid tyre with the nuts retained from step 5.
8. Replace the drive wheel back onto the motor. See Section III. Torque the 4 nuts to 30 N • m (21.7 ft • lb) and the
main nut to 28.5 N • m (21 ft • lb).
***Make sure the Axle Key is inserted back into the motor shaft.***
Solid Tyre removal and installation
Torque the nut to
28.5 N • m (21 ft • lb)
www.pridemobility.co.uk
Mobility Products. Ltd.
7
2
Torque the nuts to
30 N • m (21.7 ft • lb)
9
Advertisement
Table of Contents
