Power Module - Pride Mobility Quantum Rehab Jazzy Select 6 Parts Replacement Manual

XII. Power Module
1. Turn off power to the joystick.
1
2. Ensure the unit is in drive mode.
Tools Required:
- Phillips Screwdriver
3. Remove the front electronics door. See Section I.
4. Remove the screws that secure the power module to the
main frame.
5. One at a time, disconnect the motor, power, bus, and
PTO/run plug harnesses and connect them to the replace-
ment power module.
6. Reverse steps 3 and 4 to complete installation.
GC
Left Motor
Power/Battery
Harness removal and installation
Power Module Hardware removal and installation
VR2
3
Right Motor
Bus
Cable
Power Seat
Inhibit Harness
Power Seat
Power Harness
www.pridemobility.co.uk
Mobility Products. Ltd.
Left Motor
Right Motor
Power/Battery
Run
Plug
17