Subscribe to Our Youtube Channel
Related Manuals for IBASE Technology ASB200-953
Summary of Contents for IBASE Technology ASB200-953
- Page 1 ASB200-953 Fanless System with 3.5” Disk-Size SBC System User’s Manual Version 1.0 (March 2022)
- Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).
- Page 3 0.1% by weight (1000 ppm) except for cadmium, limited to 0.01% by weight (100 ppm). • Lead (Pb) • Mercury (Hg) • Cadmium (Cd) • Hexavalent chromium (Cr6+) • Polybrominated biphenyls (PBB) • Polybrominated diphenyl ether (PBDE) ASB200-953 User Manual...
- Page 4 Do not disassemble, repair or make any modification to the device. Disassembly, modification, or any attempt at repair could generate hazards and cause damage to the device, even bodily injury or property damage, and will void any warranty. ASB200-953 User Manual...
- Page 5 Software in use (such as OS and application software, including the version numbers) 3. If repair service is required, you can download the RMA form at http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and contact your distributor or sales representative. ASB200-953 User Manual...
-
Page 6: Table Of Contents
USB2 #5 #6 (J6) ..............32 2.5.8 DC-In Connector (J7) .............. 32 2.5.9 LVDS CHB Connector (J12 - 2nd, J14 - 1st) ......33 2.5.10 SATA Power Connector (J13) ..........34 2.5.11 LVDS Backlight Connector (J15) ..........34 ASB200-953 User Manual... - Page 7 Advanced Settings ................53 Chipset Settings ..................68 Security Settings ................... 72 Boot Settings..................73 Save & Exit Settings................74 Appendix ...................... 75 I/O Port Address Map ................76 Interrupt Request Lines (IRQ) ............... 78 Watchdog Timer Configuration .............. 79 ASB200-953 User Manual...
-
Page 9: Chapter 1 General Information
Chapter 1 General Information The information provided in this chapter includes: Features Packing List Optional Accessories Specifications Product View Dimensions ... -
Page 10: Introduction
1.1 Introduction The ASB200-953 compact box PC housing IBASE’s IB953 3.5-inch SBC powered by Intel® Core™ processors with a 15W TDP threshold. Aimed at smart applications in warehouse logistics management, factory automation and the automotive industry, the ASB200-953 features high performance with low power consumption. -
Page 11: Features
General Information 1.2 Features System with IBASE IB953 3.5-inch SBC (TDP 15W for ASB200-953, 28W TDP for ASB210-953) Onboard 11th Gen Intel® Core™ U-Series Processor Supports 3x M.2 sockets (B-Key/E-Key and M-Key) 12V (-10%) ~ 24V (+10%) DC-in power input ... -
Page 12: Specifications
1x Digital I/O (4-in/4-out) 2x Antenna holes Rear I/O 1x HDD LED 1x 3-pin DC-in terminal block for 12V (-10%) ~ 24V (+10%) Expansion 3x M.2 sockets (B-Key/ E-Key and M-Key) ASB200-953 User Manual... - Page 13 Operating: 0.25 Grms / 5 ~ 500 Hz Vibration Protection Non-operating: 1 Grms / 5 ~ 500Hz Operating: 20 g / 11 ms Shock Protection Non-operating: 40 g / 11 ms All specifications are subject to change without prior notice. ASB200-953 User Manual...
-
Page 14: Product View
1.6 Product View Front View ASB200-953 ASB210-953 Name Name Antenna Holes Digital I/O (4-In / 4-Out) HDD LED DC +12V~ +24V Power Input Power Switch ASB200-953 User Manual... - Page 15 General Information Rear View ASB200-953 ASB210-953 Name Name Antenna Holes USB 3.1 Ports Display Port USB 2.0 Port LAN Ports COM Port ASB200-953 User Manual...
- Page 16 Oblique View ASB200-953 ASB200-953 User Manual...
- Page 17 General Information ASB210-953 ASB200-953 User Manual...
-
Page 18: Dimensions
1.7 Dimensions Unit: mm ASB200-953 ASB200-953 User Manual... - Page 19 General Information ASB210-953 ASB200-953 User Manual...
-
Page 20: Chapter 2 Hardware Configuration
Chapter 2 Hardware Configuration The information provided in this chapter includes: Installations Descriptions and locations of connectors ... -
Page 21: Installations
Hardware Configuration 2.1 Installations 2.1.1 HDD Installation If you need to install or replace an SSD or a HDD, follow the instructions below. 1. Remove the screws shown below to remove/install the SDD/HDD tray and the SSD/HDD drive. ASB200-953 User Manual... -
Page 22: Card Installation
2. After removing the heatsink with the board, turn it upside down and remove the screws holding the cover plate in order to access the parts on the main board such as the M.2 card slot and the memory socket as shown below. ASB200-953 User Manual... -
Page 23: Memory Installation
3. Gently push the module down in an upright position until the clips of the slot close to hold the module in place when the module touches the bottom of the slot. To remove the module, press the clips outwards with both hands, and the module will pop-up. ASB200-953 User Manual... -
Page 24: Wifi / 4G / 5G Antenna Installation
WiFi / 4G / 5G Antenna Installation Thread the WiFi / 4G / 5G antenna cable through an antenna hole. Then fasten the antenna as shown below. Info: The diameter of the nut is around 6.35 mm (0.25”-36UNC). ASB200-953 User Manual... -
Page 25: Side Bracket Installation
Hardware Configuration 2.1.5 Side Bracket Installation Use the screws provided in the accessory kit to lock the case together with the bracket ASB200-953 User Manual... -
Page 26: Pinout For Com Ports, Dc Power & Digital I/O Connectors
DCD, Data carrier detect DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground Assignment RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground ASB200-953 User Manual... - Page 27 Hardware Configuration DC Power Input Connector (terminal block) Assignment Pin Assignment Ground +12V ~ +24V Chassis Ground Digital I/O Connector (terminal block) Pin Assignment Pin Assignment Ground ASB200-953 User Manual...
-
Page 28: Setting The Jumpers
1 2 3 When two pins of a jumper are encased in a jumper cap, this jumper is closed, i.e. turned On. When a jumper cap is removed from two jumper pins, this jumper is open, i.e. turned Off. ASB200-953 User Manual... -
Page 29: Jumper & Connector Locations On Ib953
Hardware Configuration 2.3 Jumper & Connector Locations on IB953 ASB200-953 User Manual... -
Page 30: Jumpers Quick Reference
Clear RTC Data Clear CMOS Data eDP Power Selection LVDS Power Selection AT/ATX Selection JP5 (For power) LVDS Panel Power / Brightness Selections JP7 (For brightness) 2.4.1 Clear CMOS Data (JP1) Function Pin closed Setting Normal (default) Clear RTC ASB200-953 User Manual... -
Page 31: Edp Panel Power Selection (Jp2)
Hardware Configuration 2.4.2 EDP Panel Power Selection (JP2) Function Setting closed Normal (default) Clear CMOS 2.4.3 eDP Power Selections (JP4) Function Pin closed Setting 3.3V (default) ASB200-953 User Manual... -
Page 32: At / Atx Selection (Jp6)
2.4.4 AT / ATX Selection (JP6) Function Pin closed Setting Open Close 2.4.5 LVDS Panel Power / Brightness Selections (JP5 / JP7) Jumper Function Pin closed Setting 3.3V (default) 3.3V Open (default) Close ASB200-953 User Manual... -
Page 33: Connectors Quick Reference
Audio Connector Audio AMP Connector USB2 #5 #6 DC-In Connector LVDS CHB Connector (1st, 2nd) J14, J12 SATA Power Connector LVDS Backlight Connector Digital I/O Connector Front Panel Setting Connector COM2 Serial Ports CPU Fan Power Connector CPU_FAN1 ASB200-953 User Manual... -
Page 34: Sata Connectors (Cn1, Cn3)
2.5.1 SATA Connectors (CN1, CN3) Pin Assignment Pin Assignment Ground Ground Ground ASB200-953 User Manual... -
Page 35: Edp Connector (Cn2)
AUXP eDP Vcc AUXN Ground Ground +3.3V Ground EDP BKLT (+12V) Ground Hot Plug detect Ground Ground TXN3 TXP3 Back Light Control Ground Back Light Enable TXN2 EDP BKLT (+12V) TXP2 +3.3V Ground Ground TXN1 TXP1 Ground ASB200-953 User Manual... -
Page 36: Com1 Serial Port (Cn4)
2.5.3 COM1 Serial Port (CN4) Assignment RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground ASB200-953 User Manual... -
Page 37: Dp Connectors (Cn8, Cn9)
Hardware Configuration 2.5.4 DP Connectors (CN8, CN9) Pin Assignment Pin Assignment LAN0_P LAN3_N LAN0_N CONFIG LAN1_P AUXP LAN1_N LAN2_P AUXN Hot Plug LAN2_N LAN3_P ASB200-953 User Manual... -
Page 38: Audio Connector (J2)
2.5.5 Audio Connector (J2) Remarks: HK_DF11-12S-PA66H Pin Assignment Pin Assignment LINE OUT_L LINE OUT_R FRONT_JD LINE IN_L LINE IN_R LINE _JD MIC_L MIC_R MIC_JD ASB200-953 User Manual... -
Page 39: Audio Amp Connector (J4)
Hardware Configuration 2.5.6 Audio AMP Connector (J4) Remarks: E-CALL_0110-161-040 Pin Assignment SPK_L+ SPK_L- SPK_R- SPK_R+ ASB200-953 User Manual... -
Page 40: Usb2 #5 #6 (J6)
2.5.7 USB2 #5 #6 (J6) Remarks: HK_DF11-8S-PA66H Pin Assignment Pin Assignment USB_PN USB_PP USB_PP USB_PN 2.5.8 DC-In Connector (J7) Pin Assignment +12 ~ +24V Ground ASB200-953 User Manual... -
Page 41: Lvds Chb Connector (J12 - 2Nd, J14 - 1St)
Hardware Configuration 2.5.9 LVDS CHB Connector (J12 - 2nd, J14 - 1st) Remarks: HIROSE_DF20G-20DP-1V(56) Pin Assignment Pin Assignment TX0P TX0N TX1P TX1N TX2P TX2N CLKP CLKN TX3P TX3N +3.3V +3.3V ASB200-953 User Manual... -
Page 42: Sata Power Connector (J13)
2.5.10 SATA Power Connector (J13) Remarks: E-CALL_0110-071-040 Pin Assignment +12V 2.5.11 LVDS Backlight Connector (J15) Remarks: E-CALL_0110-161-040 Assignment +12V Backlight Enable Brightness Control Ground ASB200-953 User Manual... -
Page 43: Digital I/O Connector (J17)
Hardware Configuration 2.5.12 Digital I/O Connector (J17) Remarks: E-CALL_0196-01-200-100 Pin Assignment Pin Assignment Ground Out3 Out1 Out2 Out0 ASB200-953 User Manual... -
Page 44: Front Panel Setting Connector (J18)
Orientation is not required when making a connection to this header. Power LED: Pins 7 and 8 This connector connects to the system power LED on control panel. This LED will light when the system turns on. ASB200-953 User Manual... -
Page 45: Com2 Serial Ports (J19)
Hardware Configuration 2.5.14 COM2 Serial Ports (J19) Remarks: HK_DF11-10S-PA66H Assignment RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground ASB200-953 User Manual... -
Page 46: Cpu Fan Power Connector (Cpu_Fan1)
2.5.15 CPU Fan Power Connector (CPU_FAN1) Remarks: PWM only Assignment Ground +12V Rotation detection Control ASB200-953 User Manual... -
Page 47: Chapter 3 Driver Installation
Chapter 3 Driver Installation The information provided in this chapter includes: ® Intel Chipset Software Installation Utility Graphics Driver Installation HD Audio Driver Installation LAN Driver Installation Intel ® Management Engine Driver Installation ... -
Page 48: Introduction
INF files for Plug & Play function for Intel chipset components. Follow the instructions below to complete the installation. 1. Insert the drivers disk in the disk drive. Click Intel on the left pane and then Intel(R) TigerLake-U Chipset Drivers on the right pane. ASB200-953 User Manual... - Page 49 Next to continue. 4. Accept the software license agreement and proceed with the installation process. 5. On the Readme File Information screen, click Install. 6. After completing the installation, click Finish to complete the setup process. ASB200-953 User Manual...
-
Page 50: Vga Driver Installation
4. Click Yes to accept the license agreement. 5. On the Readme File Information screen, click Next until the installation starts. 6. When Setup is Complete, click Finish to restart the computer for changes to take effect. ASB200-953 User Manual... -
Page 51: Hd Audio Driver Installation
2. Click Realtek High Definition Audio Driver. 3. On the Welcome screen of the InstallShield Wizard, click Next. 4. Click Next until the installation starts. 5. After the installation, restart the computer for changes to take effect. ASB200-953 User Manual... -
Page 52: Lan Driver Installation
3.5 LAN Driver Installation 1. Insert the drivers disk in the disk drive. Click Intel on the left pane and then Intel(R) TigerLake-U Chipset Drivers on the right pane. 2. Click Intel(R) PRO LAN Network Drivers.. ASB200-953 User Manual... - Page 53 6. On the Setup Options screen, click the checkbox to select the desired driver(s) for installation. Then click Next to continue. 7. On the Ready to Install the Program screen, click Install to begin the installation. When the Install wizard hascompleted, click Finish. ASB200-953 User Manual...
-
Page 54: Intel® Management Engine Drivers Installation
3.6 Intel® Management Engine Drivers Installation 1. Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) TigerLake-U Chipset Drivers on the right pane. 2. Click Intel(R) ME 12.x Drivers. ASB200-953 User Manual... - Page 55 3. When the Welcome screen appears, click Next. 4. Accept the license agreement and click Next. 5. When the Destination Folder screen appears, click Next and the components will be installed. 6. After Intel Management Engine Components have been successfully installed, click Finish. ASB200-953 User Manual...
-
Page 56: Intel® Thunderbolt Drivers Installation
3.7 Intel® Thunderbolt Drivers Installation 1. Insert the disk enclosed in the package with the board. Click Intel on the left pane and then Intel(R) TigerLake-U Chipset Drivers on the right pane. 2. Click Intel(R) Thunderbolt Drivers. ASB200-953 User Manual... - Page 57 Driver Installation 3. In the next screen, accept the license agreement and click Next. 4. When the drivers have been successfully installed, click Restart. ASB200-953 User Manual...
-
Page 58: Chapter 4 Bios Setup
Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: Main Settings Advanced Settings Chipset Settings Security Settings ... -
Page 59: Introduction
These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. ASB200-953 User Manual... -
Page 60: Main Settings
Sets the date. Use the <Tab> key to switch between the System Date data elements. Set the time. Use the <Tab> key to switch between the System Time data elements. NOTE: Below is the corresponding screen for the IB953EF BIOS ASB200-953 User Manual... -
Page 61: Advanced Settings
BIOS Setup 4.4 Advanced Settings This section allows you to configure system features according to your preference. ASB200-953 User Manual... - Page 62 Serial IO UART0 needs to be enabled to select BT Module. Bluetooth Default: Disabled Module Advanced Configure ACPI objects for wireless devices Settings Default: Disabled WWAN Configure WWAN related options. Configuration WWAN Device: enable or disable M.2 WWAN device WWAN Reset Default: Enabled Workaround ASB200-953 User Manual...
- Page 63 Enables utilization of additional hardware capabilities Execution provided by Intel® Trusted Execution Technology. Technology Changes require a full power cycle to take effect. NOTE: The selection for Hyper-Threading is available on IB953AF-i7, IB953AF-i5 and IB953EF-i3 only (not on IB953EF-CLE). ASB200-953 User Manual...
- Page 64 BIOS Setting Description Intel Allows more than two frequency ranges to be supported Speedstep Intel Speed Enable/Disable Intel Speed Shift Technology support. Shift Enabling will expose the CPPC v2 interface to allow for Technology hardware controlled P-states. ASB200-953 User Manual...
- Page 65 BIOS Setup 4.4.4 PCH-FW Configuration ASB200-953 User Manual...
- Page 66 TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict support to TPM 2.0 devices. Auto will support Device Select both with the default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated. ASB200-953 User Manual...
- Page 67 BIOS Setup 4.4.6 ACPI Settings BIOS Setting Description Enables / Disables the system ability to hibernate Enable (OS/S4 Sleep State). This option may be not effective Hibernation with some OS. ASB200-953 User Manual...
- Page 68 LCD Panel Type 1024, 1366 x 768, 1440 x 900, 1600 x 900, 1600 x 1200, 1680 x 1050, 1920 x 1080, 1920 x 1200 LVDS Brightness Options: 0(Min), 1, 2, 3, 4, 5, 6, 7(Max) Control ASB200-953 User Manual...
- Page 69 Sets parameters of serial ports. Serial Ports Enables / Disables the serial port and select an optimal Configuration setting for the Super IO device. Standby Power This feature is available in IB953EF but not in IB953AF. on S5(ERP) ASB200-953 User Manual...
- Page 70 ASB200-953 User Manual...
- Page 71 Enables / Disables smart fan control. fan control These fields are the parameters of the hardware Temperatures / monitoring function feature of the motherboard. The Voltages values are read-only values as monitored by the system and show the PC health status. ASB200-953 User Manual...
- Page 72 4.4.10 AMI Graphic Output Protocol Policy ASB200-953 User Manual...
- Page 73 Max.time the device will take before it properly reports Device power- itself to the Host Controller. ‘Auto’ uses default value: up delay for a Root port it is 100ms, for a Hub port the delay is taken from Hub descriptor. ASB200-953 User Manual...
- Page 74 PXE boot wait time PXE boot. Use either +/- or numeric keys to set the value Number of times the presence of media will be Media detect count checked. Use either +/- nurmeric keys to set the value. ASB200-953 User Manual...
- Page 75 BIOS Setup 4.4.13 NVMe Configuration ASB200-953 User Manual...
-
Page 76: Chipset Settings
4.5 Chipset Settings 4.5.1 System Agent (SA) Configuration 4.5.1.1. Graphics Configuration: ASB200-953 User Manual... - Page 77 BIOS Setup 4.5.1.2. VT-d ASB200-953 User Manual...
- Page 78 SATA Controller(s) Enables / Disables the Serial ATA. SATA Mode Selects IDE or AHCI Mode. Selection Serial ATA Port 0~2 Enables / Disables Serial Port 0 ~ 2. SATA Ports Hot Plug Enables / Disables SATA Ports HotPlug. ASB200-953 User Manual...
- Page 79 PCH LAN Controller Enables / Disables onboard NIC. Wake on LAN Enables / Disables integrated LAN to wake the Enable system. Power-On after Specify what state to to when power is re-applied Power failure after a power failure (G3 state) ASB200-953 User Manual...
-
Page 80: Security Settings
The mode change requires platform reset. Secure Boot mode options: Standard or Custom. In Custom mode, Secure Boot Policy variables can Secure Boot Mode be configured by a physically present user without full authentication ASB200-953 User Manual... -
Page 81: Boot Settings
Number of seconds to wait for setup activation key. Setup Prompt Timeout 65535 (0xFFFF) means indefinite waiting. Bootup Selects the keyboard NumLock state. NumLock State Quiet Boot Enables / Disables Quiet Boot option. FIXED BOOT ORDER Sets the system boot order. Priorities ASB200-953 User Manual... -
Page 82: Save & Exit Settings
Saves the changes done so far as User Defaults. Restores the user defaults to all the setup Restore User Defaults options. Launch EFI Shell from Attempts to launch EFI shell application (Shell.efi) filesystem device from one of the available filesystem devices. ASB200-953 User Manual... -
Page 83: Appendix
Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. -
Page 84: I/O Port Address Map
Programmable interrupt controller 0x000000A0-0x000000A1 Programmable interrupt controller 0x000000A4-0x000000A5 Programmable interrupt controller 0x000000A8-0x000000A9 Programmable interrupt controller 0x000000AC-0x000000AD Programmable interrupt controller 0x000000B0-0x000000B1 Programmable interrupt controller 0x000000B4-0x000000B5 Programmable interrupt controller 0x000000B8-0x000000B9 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000004D0-0x000004D1 Programmable interrupt controller ASB200-953 User Manual... - Page 85 PCI Express Root Complex 0x00000D00-0x0000FFFF PCI Express Root Complex 0x00000040-0x00000043 System timer 0x00000050-0x00000053 System timer Intel(R) PCI Express Root Port #7 - 0x00003000-0x00003FFF A0BE 0x00002000-0x000020FE Motherboard resources 0x00000060-0x00000060 Standard PS/2 Keyboard 0x00000064-0x00000064 Standard PS/2 Keyboard 0x0000EFA0-0x0000EFBF Intel(R) SMBus - A0A3 ASB200-953 User Manual...
-
Page 86: Interrupt Request Lines (Irq)
IRQ 4294967286 Intel(R) I211 Gigabit Network Connection IRQ 4294967285 Intel(R) I211 Gigabit Network Connection IRQ 4294967283 Intel(R) I211 Gigabit Network Connection IRQ 4294967293 PCI Express Root Port IRQ 16 High Definition Audio Controller IRQ 17 USB Synopsys Controller ASB200-953 User Manual... -
Page 87: Watchdog Timer Configuration
**endptr; char SIO; printf("Fintek 81866 watch dog program\n"); SIO = Init_ F81804(); if (SIO == 0) printf("Can not detect Fintek 81866, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); ASB200-953 User Manual... - Page 88 Set_ F81804_LD(0x07); //switch to logic device 7 bBuf = Get_ F81804_Reg(0xFA); bBuf &= ~0x01; Set_ F81804_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_ F81804_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_ F81804_Reg(0xF5, bBuf); //disable WDT ASB200-953 User Manual...
- Page 89 (ucDid == 0x07) //Fintek 81866 { goto Init_Finish; F81804_BASE = 0x00; result = F81804_BASE; Init_Finish: return (result); //--------------------------------------------------------------------------- void Unlock_ F81804 (void) outportb( F81804_INDEX_PORT, F81804_UNLOCK); outportb( F81804_INDEX_PORT, F81804_UNLOCK); //--------------------------------------------------------------------------- void Lock_ F81804 (void) outportb( F81804_INDEX_PORT, F81804_LOCK); ASB200-953 User Manual...
- Page 90 Set_ F81804_Reg( unsigned char REG, unsigned char DATA) Unlock_ F81804(); outportb( F81804_INDEX_PORT, REG); outportb( F81804_DATA_PORT, DATA); Lock_ F81804(); //--------------------------------------------------------------------------- unsigned char Get_ F81804_Reg(unsigned char REG) unsigned char Result; Unlock_ F81804(); outportb( F81804_INDEX_PORT, REG); Result = inportb( F81804_DATA_PORT); Lock_ F81804(); return Result; //--------------------------------------------------------------------------- ASB200-953 User Manual...
- Page 91 #define F81804_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81804_UNLOCK 0x87 #define F81804_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_ F81804(void); void Set_ F81804_LD( unsigned char); void Set_ F81804_Reg( unsigned char, unsigned char); unsigned char Get_ F81804_Reg( unsigned char); //--------------------------------------------------------------------------- #endif // F81804_H ASB200-953 User Manual...
Need help?
Do you have a question about the ASB200-953 and is the answer not in the manual?
Questions and answers