IBASE Technology ASB200-953 User Manual page 79

4.5.2.2 SATA and RST Configuration:
BIOS Setting
USB Port Disable
Overwrite
USB SS Physical
Connector
PCH LAN Controller Enables / Disables onboard NIC.
Wake on LAN
Enable
Power-On after
Power failure
ASB200-953 User Manual
Description
Selectively Enable/Disable the corresponding USB
port from reporting a Device Connection to the
controller. Options: Disabled, Select Per-Pin
Enable/Disable the USB Physical Connector
(physical port). Once disabled, any USB devices
plug into the connector will not be detected by BIOS
or OS.
Enables / Disables integrated LAN to wake the
system.
Specify what state to to when power is re-applied
after a power failure (G3 state)
BIOS Setup
4
71