4.4.11 USB Configuration
BIOS Setting
Legacy USB
Support
XHCI Hand-off
USB Mass
Storage Driver
Support
USB Transfer
time-out
Device reset
time-out
Device power-
up delay
ASB200-953 User Manual
Description
Enabled enables Legacy USB support.
Auto disables legacy support if there is no USB
device connected.
Disabled keeps USB devices available only for EFI
applications.
This is a workaround for OSes without XHCI hand-off
support. The XHCI ownership change should be claimed
by XHCI driver.
Enables / Disables the support for USB mass storage
driver.
The time-out value (1 / 5 10 / 20 secs) for Control, Bulk,
and Interrupt transfers.
Gives seconds (10 / 20 / 30 / 40 secs) to delay
execution of Start Unit command to USB mass storage
device.
Max.time the device will take before it properly reports
itself to the Host Controller. 'Auto' uses default value:
for a Root port it is 100ms, for a Hub port the delay is
taken from Hub descriptor.
BIOS Setup
4
65