Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IBASE Technology FWA6706D
Summary of Contents for IBASE Technology FWA6706D
- Page 1 FWA6706R FWA6706D Network Appliance User’s Manual Version 1.1 (Dec. 2019)
- Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).
-
Page 3: Compliance
0.1% by weight (1000 ppm) except for cadmium, limited to 0.01% by weight (100 ppm). • Lead (Pb) • Mercury (Hg) • Cadmium (Cd) • Hexavalent chromium (Cr6+) • Polybrominated biphenyls (PBB) • Polybrominated diphenyl ether (PBDE) FWA6076R & FWA6706D User Manual... -
Page 4: Important Safety Information
You are not suggested to disassemble, repair or make any modification to the device. Disassembly, modification, or any attempt at repair could generate hazards and cause damage to the device, even bodily injury or property damage, and will void any warranty. FWA6706R & FWA6706D User Manual... -
Page 5: Caution
Software in use (such as OS and application software, including the version numbers) 3. If repair service is required, you can download the RMA form at http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and contact your distributor or sales representative. FWA6076R & FWA6706D User Manual... -
Page 6: Table Of Contents
Features ....................3 Packing List .................... 3 Optional Accessories ................3 Specifications ..................4 Overview – FWA6706R ................6 Overview – FWA6706D ................7 Dimensions – FWA6706R ............... 8 Dimensions – FWA6706D ............... 9 Chapter 2 Hardware Configuration ............10 Essential Installations ................ - Page 7 Security Settings ................... 48 Boot Settings..................49 Save & Exit Settings................50 Appendix ...................... 51 I/O Port Address Map ................52 Interrupt Request Lines (IRQ) ............... 54 Digital I/O Sample Code ................ 56 Watchdog Timer Configuration .............. 60 FWA6076R & FWA6706D User Manual...
-
Page 8: Chapter 1 General Information
Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Optional Accessories • Specifications • Overview • Dimensions... -
Page 9: Introduction
1.1 Introduction FWA6706R & FWA6706D are specifically designed for the network security and management market. There are plenty of applications adopting network security or network management as listed below. Photo of FWA6706R Photo of FWA6706D Network Security Applications: • Firewall •... -
Page 10: Features
Side Bracket 1.4 Optional Accessories IBASE provide optional accessories as follows. Please contact us or your dealer if you need any. • Console Cable (160 cm, PK1-51) • VGA Cable (40 cm, VGA21A, for FWA6706R only) FWA6706R & FWA6706D User Manual... -
Page 11: Specifications
2 kg (4.41 lb) Certificate CE / FCC Class B Product Name FWA6706R FWA6706D I/O Ports Power Input 1 x AC inlet 100 ~ 240V 1 x DC 12V M12 Power Connector Connector 2 x 16 characters FWA6706R & FWA6706D User Manual... - Page 12 • Vibration Operating: 0.25 Grms / 3 ~ 500 Hz (Z-axis) Protection • Non-operating: 1.0 Grms / 3 ~ 500Hz (Z-axis) Shock Sawtooth wave 40G Protection All specifications are subject to change without prior notice. FWA6706R & FWA6706D User Manual...
-
Page 13: Overview - Fwa6706R
LED Indicators for Status, USB 3.0 Ports HDD & Power User Self-defined Button GbE LAN Ports (with GPI Signal) Rear View Name Name AC Power Inlet Reserved & Optional for VGA Port System Fan Oblique View FWA6706R & FWA6706D User Manual... -
Page 14: Overview - Fwa6706D
GbE LAN 6 Ports Antenna Holes (Optional) USB 3.0 Ports [1]: For FWA6706D, each LAN port has additional corresponding LEDs on the front panel for indicating the link and speed of the port. Oblique View FWA6706R & FWA6706D User Manual... -
Page 15: Dimensions - Fwa6706R
1.8 Dimensions – FWA6706R Unit: mm FWA6706R & FWA6706D User Manual... -
Page 16: Dimensions - Fwa6706D
General Information 1.9 Dimensions – FWA6706D Unit: mm FWA6706R & FWA6706D User Manual... -
Page 17: Chapter 2 Hardware Configuration
Chapter 2 Hardware Configuration The information provided in this chapter includes: • Essential installations before you begin • Information and locations of connectors... -
Page 18: Essential Installations
FWA6706D first as illustrated below. Disassemble the micro-SIM slot door for installing a micro-SIM card to FWA6706D. Disassemble the front cover for installing a CF card to FWA6706D. FWA6706R Loosen 10 screws to disassemble the device cover. -
Page 19: Memory Installation / Replacement
If you need to install or replace an HDD / SSD, follow the instructions below for installation after you disassemble the device cover for FWA6706R or the device bottom cover for FWA6706D. FWA6706R 1. Disassemble the HDD / SSD bracket by loosening 4 screws below. - Page 20 4 screws enclosed in the device package. 3. Assemble the HDD/SSD bracket back and put a thermal pad between the HDD / SSD and the device bottom cover. FWA6706R & FWA6706D User Manual...
-
Page 21: Cf Card Installation
2. Insert the card to one of the micro-SIM card slot with the chip up and push the card by using your fingernail or a corner of the micro-SIM card door. To remove the micro-SIM card, push the card again. FWA6706R & FWA6706D User Manual... -
Page 22: Fan Installation / Replacement (For Fwa6706R Only)
4 screws of the fan on the rear side of the device, take out the fan, replace with a new one, and tighten these screws. 2.2 Pinout for Console Port FWA6706R: ➔ FWA6706D: ➔ Signal Name Signal Name Ground Ground FWA6706R & FWA6706D User Manual... -
Page 23: Setting The Jumpers
When two pins of a jumper are encased in a jumper cap, this jumper is closed, i.e. turned On. When a jumper cap is removed from two jumper pins, this jumper is open, i.e. turned Off. FWA6706R & FWA6706D User Manual... -
Page 24: Jumper & Connector Locations On Motherboard
Hardware Configuration 2.4 Jumper & Connector Locations on Motherboard Motherboard: MBN501R FWA6706R & FWA6706D User Manual... - Page 25 Motherboard: MBN501D FWA6706R & FWA6706D User Manual...
-
Page 26: Jumpers Quick Reference
Connector Name Page AT & ATX Mode Selection ME Register Clearance CMOS Data Clearance Factory Use Only JP1, JP6 2.5.1 AT & ATX Mode Selection (JP2) Function Pin closed Illustration AT Mode (default) ATX Mode FWA6706R & FWA6706D User Manual... -
Page 27: Me Register Clearance (Jp4)
2.5.2 ME Register Clearance (JP4) Function Pin closed Illustration Normal (default) Clear ME Register 2.5.3 CMOS Data Clearance (JP5) Function Pin closed Illustration Normal (default) Clear CMOS FWA6706R & FWA6706D User Manual... -
Page 28: Connectors Quick Reference
User Self-defined Button with GPI Signal Factory Use Only J13, J15, J16 [1]: For FWA6706D, each LAN port has additional corresponding LEDs on the front panel for indicating the link and speed of the port. FWA6706R & FWA6706D User Manual... -
Page 29: System Fan Power Connector (Fan)
System Fan Power Connector (FAN) FAN connector is available only for FWA6706R. Assigment Assigment Ground Rotation detection +12V Rotation control 2.6.2 AT 12V Power Connector (J3) J3 is available only for FWA6706R. Assigment Assigment +12V Ground FWA6706R & FWA6706D User Manual... -
Page 30: External Sata Power Connector (J4)
Hardware Configuration 2.6.3 External SATA Power Connector (J4) Assigment Assigment Ground Ground +12V 2.6.4 VGA Connector (J18) Assigment Assigment VGA_R VGA_PWR VGA_G Ground VGA_B VGADDCDATA Ground HSYNC Ground VSYNC Ground VGADDCCLK Ground FWA6706R & FWA6706D User Manual... -
Page 31: Usb 2.0 Port (J9)
2.6.5 USB 2.0 Port (J9) Assigment Assigment Ground Ground 2.6.6 Digital I/O Connector (J17) Assigment Assigment Ground OUT3 OUT1 OUT2 OUT0 FWA6706R & FWA6706D User Manual... -
Page 32: System Function Connector (J14)
This connector connects to the hard drive activity LED on control panel. This LED will flash when the HDD is being accessed. • Bypass LED1 (Pins 9 and 10) The two pins make an external LED connector light for LAN bypass. FWA6706R & FWA6706D User Manual... -
Page 33: Chapter 3 Bios Setup
Chapter 3 BIOS Setup This chapter the different settings available in the AMI describes BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Security Settings •... -
Page 34: Introduction
These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. FWA6706R & FWA6706D User Manual... -
Page 35: Main Settings
3.3 Main Settings BIOS Setting Description System Date Sets the date. Use the <Tab> key to switch between the data elements. System Time Set the time. Use the <Tab> key to switch between the data elements. FWA6706R & FWA6706D User Manual... -
Page 36: Advanced Settings
3.4.1 Trusted Computing BIOS Setting Description Security Device Support Enables / Disables BIOS support for security device. OS will not show the security device. TCG EFI protocol and INT1A interface will not be available. FWA6706R & FWA6706D User Manual... -
Page 37: Acpi Settings
OS. ACPI Sleep State Selects a ACPI sleep state for the system to enter. Options: Suspend Disabled, S3 (Suspend to RAM) Lock Legacy Resources Enables / Disables Lock of Legacy Resources. FWA6706R & FWA6706D User Manual... -
Page 38: Fintek Super Io Configuration
BIOS Setup 3.4.3 Fintek Super IO Configuration BIOS Setting Description Serial Port Configuration Sets Parameters of Serial Port(s). You can enable / disable the serial port and select an optimal settings for the Super IO device. FWA6706R & FWA6706D User Manual... -
Page 39: Fintek Super Io Hardware Monitor
These fields are the parameters of the hardware monitoring function feature of the motherboard. The values are read-only as monitored by the system and showing the PC health status Shutdown Temperature This field enables or disables the Shutdown Temperature FWA6706R & FWA6706D User Manual... -
Page 40: Lan Bypass Configuration
1. Select Bypass mode for the above LAN Bypass Configuration in BIOS. 2. Save the setting and exit. 3. Run your test program under MS-DOS. 4. The lit Bypass LED indicates the bypass function runs properly. FWA6706R & FWA6706D User Manual... -
Page 41: Serial Port Console Redirection
Console Redirection Sets up the terminal type, bits, parity, flow control, Settings combo key, recorder mode, resolution and putty keypad. Legacy Console Sets up Legacy Console Redirection. Redirection Settings Console Redirection Enables / Disables Console Redirection. FWA6706R & FWA6706D User Manual... - Page 42 Options: None, Hardware RTS/CTS VT-UTFB Combo Enables / Disables VT-UTFB combination key Key Support support for ANSI/VT100 terminals. Recorder Mode Enabling this mode allows only text to be sent. This is to capture terminal data. FWA6706R & FWA6706D User Manual...
- Page 43 3.4.6.2. Legacy Console Redirection Settings BIOS Setting Description Legacy Serial Selects a COM Port to display redirection of Legacy Redirec OS and Legacy OPROM Messages. Options: COMO, COM1 (Disabled), COM2 (Pci Bus0, Dev0, Func0) (Disabled) FWA6706R & FWA6706D User Manual...
- Page 44 BIOS Setup 3.4.6.3. Console Redirection BIOS Setting Description Legacy Serial Selects a COM Port to display redirection of Legacy Redirec OS and Legacy OPROM Messages. Options: COMO, COM1 (Disabled), COM2 (Pci Bus0, Dev0, Func0) (Disabled) FWA6706R & FWA6706D User Manual...
-
Page 45: Cpu Configuration
Monitor Mwait Enables / Disables the Monitor Mwait. Intel(R) SpeedStep (tm) Enables / Disables the function to allow more than two frequency ranges to be supported. Turbo Mode Enables / Disables Turbo Mode. FWA6706R & FWA6706D User Manual... - Page 46 3.4.7.1. CPI Power Management BIOS Setting Description Turbo Mode Enables / Disables the turbo mode. Boot performance Selects the performance state that the BIOS will set mode before OS handoff. Options: Max Performance, Max Battery FWA6706R & FWA6706D User Manual...
-
Page 47: Network Stack Configuration
3.4.8 Network Stack Configuration BIOS Setting Description Network Stack Enables / Disables UEFI Network Stack. FWA6706R & FWA6706D User Manual... -
Page 48: Csm Configuration
Controls the execution of UEFI and Legacy Video OpROM. Options: Do not lanuch / UEFI / Legacy Other PCI devices Determines OpROM execution policy for devices other than network, storage or video. Options: Do not lanuch / UEFI / Legacy FWA6706R & FWA6706D User Manual... -
Page 49: Usb Configuration
The maximum time the device will take before it properly reports itself to the Host Controller. Auto uses default value for a Root port it is 100ms. But for a Hub port, the delay is taken from Hub descriptor. Options: Auto / Manual FWA6706R & FWA6706D User Manual... -
Page 50: Chipset
BIOS Setting Description North Bridge North Bridge Parameters South Cluster Configuration South Cluster Configuration 3.5.1 North Bridge BIOS Setting Description Max TOLUD Maximum Value of TOLUD. Options: 2 GB, 2.25 GB, 2.5 GB, 2.75 GB, 3 FWA6706R & FWA6706D User Manual... -
Page 51: South Cluster Configuration
PCI Express PCIe configuration settings Configuration SATA Drivers Press Enter to Select the SATA device configuration setup options. USB Configuration USB configuration settings 3.5.2.1. HD-Audio Configuration BIOS Setting Description HD-Audio Support Enables / Disables HD-Audio support. FWA6706R & FWA6706D User Manual... - Page 52 “Auto” disables the unused root port automatically for the most optimumpower savings. BIOS Setting Description PCI Express Root Controls the PCIe root port(s). Ports “Auto” disables the unused root port automatically for the most optimumpower savings. Options: Enable / Disable / Auto FWA6706R & FWA6706D User Manual...
- Page 53 Enables / Disables the Chipset SATA controller. The chipset SATA controller supports the 2 black internal SATA ports (up to 3 Gb/s supported per port). SATA Mode Determines how SATA controller(s) operate. Selection Options: AHCI FWA6706R & FWA6706D User Manual...
- Page 54 Enables / Disables XHCI pre-boot driver support. Driver XHCI Mode Once disabled, XHCI controller would be function disabled, none of the USB devices are detectable and usable during boot and in OS. Do not disable it unless for debug. FWA6706R & FWA6706D User Manual...
-
Page 55: Security Settings
3.6 Security Settings BIOS Setting Description Administrator Password Sets an administrator password for the setup utility. User Password Sets a user password. FWA6706R & FWA6706D User Manual... -
Page 56: Boot Settings
Controls the placement of newly detected UEFI boot options. Options: Default, Place First, Place Last Boot Mode Select Selects the boot mode as Legacy or UEFI. Boot Option Priorities Sets the system boot order priorities for hard disk, CD/DVD, USB, Network. FWA6706R & FWA6706D User Manual... -
Page 57: Save & Exit Settings
Restores / Loads defaults values for all the setup options. Save as User Defaults Saves the changes done so far as User Defaults. Restore User Defaults Restores the user defaults to all the setup options. FWA6706R & FWA6706D User Manual... -
Page 58: Appendix
Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. • I/O Port Address Map • Interrupt Request Lines (IRQ) • Watchdog Timer Configuration... -
Page 59: I/O Port Address Map
Intel(R) Celeron(R)/Pentium(R) Processor 0x0000F040-0x0000F05F SMBUS - 5AD4 0x0000E000-0x0000EFFF Intel(R) Celeron(R)/Pentium(R) Processor PCI Express Root Port - 5AD9 0x0000D000-0x0000DFFF Intel(R) Celeron(R)/Pentium(R) Processor PCI Express Root Port - 5ADA 0x000003F8-0x000003FF Communications Port (COM1) 0x0000B000-0x0000BFFF PCI-to-PCI Bridge 0x0000C000-0x0000CFFF PCI-to-PCI Bridge FWA6706R & FWA6706D User Manual... - Page 60 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000004D0-0x000004D1 Programmable interrupt controller 0x0000F000-0x0000F03F Intel(R) HD Graphics 0x0000F090-0x0000F097 Standard SATA AHCI Controller 0x0000F080-0x0000F083 Standard SATA AHCI Controller 0x0000F060-0x0000F07F Standard SATA AHCI Controller 0x00000040-0x00000043 System timer 0x00000050-0x00000053 System timer FWA6706R & FWA6706D User Manual...
-
Page 61: Interrupt Request Lines (Irq)
IRQ 54 ~ IRQ 204 Microsoft ACPI-Compliant System IRQ 256 ~ IRQ 511 Microsoft ACPI-Compliant System IRQ 4294967292 Intel(R) Trusted Execution Engine Interface IRQ 4294967293 Intel(R) HD Graphics IRQ 4294967291 Intel(R) I211 Gigabit Network Connection #5 FWA6706R & FWA6706D User Manual... - Page 62 IRQ 4294967265 Intel(R) I211 Gigabit Network Connection #2 IRQ 4294967264 Intel(R) I211 Gigabit Network Connection #2 IRQ 4294967263 Intel(R) I211 Gigabit Network Connection #2 IRQ 4294967262 Intel(R) I211 Gigabit Network Connection #2 IRQ 0 System timer FWA6706R & FWA6706D User Manual...
-
Page 63: Digital I/O Sample Code
F81964_BASE = 0x2E; result = F81964_BASE; ucDid = Get_F81964_Reg(0x20); if ((ucDid == 0x07) || (ucDid == 0x10) || (ucDid == 0x15)) //Fintek 81865/81846/81866/81946/81964 goto Init_Finish; } F81964_BASE = 0x00; result = F81964_BASE; Init_Finish: return (result); //====================================================================== ===== FWA6706R & FWA6706D User Manual... - Page 64 Set_F81964_Reg( unsigned char REG, unsigned char DATA) Unlock_F81964(); outportb(F81964_INDEX_PORT, REG); outportb(F81964_DATA_PORT, DATA); Lock_F81964(); //====================================================================== ===== unsigned char Get_F81964_Reg(unsigned char REG) unsigned char Result; Unlock_F81964(); outportb(F81964_INDEX_PORT, REG); Result = inportb(F81964_DATA_PORT); Lock_F81964(); return Result; //====================================================================== ===== FWA6706R & FWA6706D User Manual...
- Page 65 #define F81964_REG_LD 0x07 //====================================================================== ===== #define F81964_UNLOCK 0x87 #define F81964_LOCK 0xAA //====================================================================== ===== unsigned int Init_F81964(void); void Set_F81964_LD( unsigned char); void Set_F81964_Reg( unsigned char, unsigned char); unsigned char Get_F81964_Reg( unsigned char); //====================================================================== ===== #endif //__F81964_H FWA6706R & FWA6706D User Manual...
- Page 66 Fintek F81964, program abort.\n"); return(1); Set_F81964_LD(0x06); //switch to logic device 6 result = ((Get_F81964_Reg(0xE2)) & 0x04) ? 0x01 : 0x00; //result = 0x00 GPI is Low / result = 0x01 GPI is High return (result); FWA6706R & FWA6706D User Manual...
-
Page 67: Watchdog Timer Configuration
SIO; printf("Fintek 81964 watch dog program\n"); SIO = Init_F81964(); if (SIO == 0) printf("Can not detect Fintek 81964, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); FWA6706R & FWA6706D User Manual... - Page 68 DisableWDT(void) unsigned char bBuf; Set_F81964_LD(0x07); //switch to logic device 7 bBuf = Get_F81964_Reg(0xFA); bBuf &= ~0x01; Set_F81964_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_F81964_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_F81964_Reg(0xF5, bBuf); //disable WDT //--------------------------------------------------------------------------- FWA6706R & FWA6706D User Manual...
- Page 69 //Fintek 81964 goto Init_Finish; } F81964_BASE = 0x00; result = F81964_BASE; Init_Finish: return (result); //--------------------------------------------------------------------------- void Unlock_F81964 (void) outportb(F81964_INDEX_PORT, F81964_UNLOCK); outportb(F81964_INDEX_PORT, F81964_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81964 (void) outportb(F81964_INDEX_PORT, F81964_LOCK); //--------------------------------------------------------------------------- void Set_F81964_LD( unsigned char LD) Unlock_F81964(); FWA6706R & FWA6706D User Manual...
- Page 70 (F81964_BASE+1) //--------------------------------------------------------------------------- #define F81964_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81964_UNLOCK 0x87 #define F81964_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81964(void); void Set_F81964_LD( unsigned char); void Set_F81964_Reg( unsigned char, unsigned char); unsigned char Get_F81964_Reg( unsigned char); //--------------------------------------------------------------------------- #endif // F81964_H FWA6706R & FWA6706D User Manual...