SCOPE OF DELIVERY ..............................3 1.2.1 COMPONENTS AND ACCESSORIES ........................ 3 1.2.2 SOFTWARE ................................. 3 ELATEC SUPPORT ................................ 3 REVISION HISTORY ..............................3 INTENDED USE .................................. 4 SAFETY INFORMATION ..............................5 TECHNICAL DATA ................................7 MODE OF OPERATION ..............................8 OPERATING MODE ...............................
ELATEC SUPPORT In case of any technical questions, refer to the ELATEC website (www.elatec.com) or contact ELATEC technical support at support-rfid@elatec.com In case of questions regarding your product order, contact your Sales representative or ELATEC customer service at info-rfid@elatec.com...
2 INTENDED USE The TWN3 LEGIC NFC RFID reader is designed for easy integration into various applications. This device supports either USB or RS- 232 communication just in dependence on the connection cable and is available as a ready-to-connect desktop reader in a slim line black or white housing.
The user is liable for the use of spare parts or accessories other than the ones sold or recommended by ELATEC. ELATEC excludes any liability for damages or injuries resulting from the use of spare parts or accessories other than the ones sold or recommended by ELATEC.
Page 6
If you are unsure about any part of the safety information above, contact ELATEC support. Any failure to comply with the safety information given in this document is considered improper use. ELATEC excludes any liability in case of improper use or faulty product installation.
Short-circuit current < 8 A Once TWN3 LEGIC NFC is connected to the host device, it detects the type of communications cable (e.g. USB or RS-232), with which it is connected to the host. The result of this detection is signaled via the two LEDs.
6 COMPLIANCE STATEMENTS TWN3 LEGIC NFC is in compliance with the EU directives and regulations as listed in the respective declaration of conformity. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
UNITED KINGDOM TWN3 LEGIC NFC complies with the requirements of the UK legislations and other regulations as listed in the respective UK declaration of conformity. The importer is responsible for applying the following information to the packaging of the product: •...
Page 15
Elatec reserves the right to change any information or data in this document without prior notice. Elatec declines all responsibility for the use of this product with any other specification but the one mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification.
Need help?
Do you have a question about the TWN3 LEGIC NFC and is the answer not in the manual?
Questions and answers