Advertisement
STEP 2:
Position the Mounting Bottom Plat RH & LH
(3) – 2 off, as shown in the drawing, form the
downside of the Rack.
Slip-in The Bush Delrin (14) – 2 off, The
Washer M5 (9) – 2 off and M5 x 25 Screw (8) -
2 off and secure the threads in the Mounting
holes .
Copyright By SRC
Design and Specification are subjected to change
MOUNTING INSTALLATION
STEP 1:
The Driver seat must be moved up (as shown
in the drawing
Unscrew the Mounting screws (4 off), as
shown in the drawing, and take out
Page 3
Advertisement
