Removing The Insert - CYBEX ATON 2 User Manual

m
27
q
that the car buckle q
m
blue belt slot
that the car belt is tight and not twisted
that the ATON 2 is vertically installed on the car seat
(see marking)
NOTE! The CYBEX ATON 2 is exclusively made for
Lift up the linear-side.impact protection (LSP) device
to improve side protection during a side collision.

REMOVING THE INSERT

The insert, which is preinstalled when purchased, helps
In order to remove the insert please loosen the cover in
the baby seat, lift the insert a little bit and take it out of
the seat.
provide more space.
The adjustable insert x
enhances the comfort of the child up to approx.
9 months. Later the insert can be removed to give the
child additional space.
is not reaching all the way to the