Lincoln Electric POWERTEC i250C STANDARD Operator's Manual page 18

Hide thumbs Also See for POWERTEC i250C STANDARD:
Table of Contents

Advertisement

Setting and Configuration Menu
To access the menu, press the left [40] and the right [38]
buttons simultaneously.
Parameter Selection Mode – the Parameter Name on the
left display [30] blinking.
Table 5 Interface Components and functions when the Settings and Configuration Menu is active.
43
Figure 11
English
30
33
40
39
38
Figure 10
Parameter Change Value Mode – the parameter value on
the right display [33] blinking.
To exit the menu with changes saved, press the left [40]
and the right [38] buttons simultaneously.
After one minute of inactivity the Menu without saving will
also exit.
Functions of Interface Components
30. Parameter Name.
33. Parameter Value.
36. Changing Parameter Value.
38. Entering
Confirm Parameter Value change.
39. Setting and Device Configuration
Menu is active.
40. Cancelation / Exit.
43. Parameter Selection.
36
User has access to two menu levels:
Basic Level – basic menu which is connected with
settings of Welding Parameters.
Advanced Level – advanced menu, configure device
menu.
Note: The availability parameters in the Setting and
Configuration Menu depend on the selected welding
program / welding process.
Note: After the device has been restarted remembers the
last selected welding program with its parameters.
Basic Menu (settings related to the welding
parameters)
The Basic Menu includes the parameters described in
Table 6.
16
WARNING
to
parameter
edition.
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powertec i250c advancedPowertec i320c standardPowertec i320c advancedPowertec i380c advancedPowertec i450c advancedK14284-1 ... Show all

Table of Contents