Advertisement
Quick Links
Occasional Animal Print - Dressing Table
Assembly Instructions -
Dimensions
Width - 79.5cm
Depth - 44.5cm
Height - 73cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Please keep for future reference
257/2471
MADE IN
BRITAIN
Issue 1 - 30/05/14
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argos 257/2471
Summary of Contents for Argos 257/2471
- Page 1 Occasional Animal Print - Dressing Table Assembly Instructions - 257/2471 Please keep for future reference Dimensions Width - 79.5cm Depth - 44.5cm MADE IN Height - 73cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800...
-
Page 2: Care And Maintenance
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 17kgs. space to layout the parts before recommend the Please lift with care. starting. - Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side (D1915A) (D1916A) (DF1349) (706 x 395mm) (706 x 395mm) (795 x 444mm) Modesty...
-
Page 4: Tools Required
If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. - Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Note: The right drawer front has a shallow Prepare the 2 drawer identification mark. fronts Screw 2 metal dowels into the left drawer front and the right drawer front...
- Page 6 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
- Page 7 Assembly Instructions Step 8 Prepare the left side Place a runner the left side Slide back the top of runner and use the 1st hole from the front to fit the 1st screw Finished front edge Slide the runner back the other way and fit the 2nd screw into the corresponding hole...
- Page 8 Assembly Instructions Step 9 Prepare the right side Place a runner the right side Slide back the top of runner and use the 1st hole from the front to fit Finished the 1st screw front edge Slide the runner back the other way and fit the 2nd screw into the corresponding hole...
- Page 9 Assembly Instructions Step 10 Prepare the cross rail Insert 2 large locking nuts into the cross rail 10mm Tap 2 wooden dowels Finished into the cross rail front edge Note: Wooden dowels must not stick out from the edge by more than 10mm or they may damage other panels.
- Page 10 Assembly Instructions Step 13 Note: The modesty must be flush with Fit the modesty the top edge of the right side. Push the modesty onto the right side Use a screwdriver to tighten the 2large locking nuts fitted to the modesty Note: Support the modesty until the left...
- Page 11 Assembly Instructions Step 15 Fit the 4 plastic nails Tap 2 plastic nails into the bottom edge of each of the sides Stand the unit up for the next step. Warning: The unit is heavy. Lift with care.
- Page 12 Assembly Instructions Step 16 Note: Due to the manufacturing process, the 2 holes for the large locking nut can be on either surface of the divider. Prepare the divider Place a runner the divider as shown. Slide back the top of runner and use the 2nd hole from the front to fit the 1st screw...
- Page 13 Assembly Instructions Step 17 Prepare the top Screw 6 metal dowels into the top Finished front edge Note: The large locking nuts can be on either surface of the divider. Step 18 Fit the divider onto the top Push the divider onto the top Finished...
- Page 14 Assembly Instructions Step 19 Fit the top Push the top down onto the side panels Finished front edge Use a screwdriver to tighten the 4 large locking nuts fitted to the side panels Note: The right drawer front has a shallow identification mark Step 20 (refer back to step 1).
- Page 15 Lift with care. Assembly is complete If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW...
- Page 16 ALR3051...
Need help?
Do you have a question about the 257/2471 and is the answer not in the manual?
Questions and answers