Fermax Duox Veo XS Installer Manual page 46

FUNCTIONING
1. FUNCTIONING: ANSWERING A CALL
A) Hands-free mode:
When you press the call button on the Outdoor Panel, a calling tone will be made on
that panel and on the monitor, and the screen will switch on. When you receive a call,
you have 30 seconds to answer before the device returns to idle. During this time, the
red LED will turn off to indicate that you have a call waiting.
Press the button
opened, operating in hands-free mode. The blue LED lights up to indicate that you
are in conversation with the outdoor panel and everything you say will be heard on it.
The LED will stay on (blue) throughout the conversation.
Communication will end automatically after 90 seconds, or whenever the button is
pressed
the red LED will come on.
(B) If set up in simple conversation mode
, release it to listen).
When you press the call button on the Outdoor Panel, a calling tone will be made on
that panel and on the monitor, and the screen will switch on. When you receive a call,
you have 30 seconds to answer before the device returns to idle. During this time, the
red LED will turn off to indicate that you have a call waiting.
Press the button
mode is indicated because the LED intermittently remains blue.
From this point onwards, each time you press the button
nel is activated (constant blue LED light) and releasing it will reactivate the input audio
channel (fl ashing blue LED ), with operation being in simple mode.
Communication will end automatically after 90 seconds, or whenever the button is
pressed . When communication is fi nished, the blue LED will turn off again and the
red LED will come on.
Notes:
- If there are several monitors / telephones in the same dwelling, only the fi rst to pick up
will receive audio, with the other monitors / telephones returning to idle mode. Trying to
pick up any of them will result in a 'line busy' tone.
- If communication is not established with the outdoor panel, the monitor will switch off
automatically after 30 seconds.
22
DUOX VEO XS AMBIANCE MONITOR
to speak with the visitor. The outdoor-indoor audio channel is
. When communication is fi nished, the blue LED will turn off again and
to speak with the visitor, while the audio channel is active. Simple
(Push the audio activation button to talk
, the output audio chan-