Fermax Duox Veo XS Installer Manual page 35

3. PROGRAMMING: ADMINISTRATOR MENU Screen
3.1 ADMINISTRATOR MENU: Monitor address PROGRAMMING
The monitor will not function if it has not been programmed!
Note: The blue LED, when blinking slowly, indicates that the monitor is not programmed -
once the monitor address is programmed this will be indicated by a continually lit red LED.
There are three options for programming the monitor from:
A) From the Monitor.
B) From the Panel
C) From the Doorbell.
A) From the Monitor.
It is possible to program the monitor using the on-screen menu.
Programming the call number: Press
gram the dwelling number (numbers from right to left).
Once the monitor address has been programmed, this will be indicated by a continually
lit red LED.
There are several options:
1. Monitor address programming.
2. Induction loop.
3. Doormatic.
4. Reset settings.
5. About.
6. Conversation mode
From Monitor From Panel
on the screen and access the screen to pro-
DUOX VEO XS AMBIANCE MONITOR
11