Fermax Smile VDS User Manual

SMILE VDS SMILE VDS

Buttons

Audio and Hang-up Activation Button.
· Upon receiving a call
this time the blue led audio button will blink to report a pending call to answer),
to talk to the visitor. The audio channel is opened from street to residence,
the audio button lights up steadily to indicate that it is in a conversation with the street and anything
said will be heard here)
· Press to complete the communication,
The monitor´s default internal timer is 90 seconds.

Wildcard button: Auto-Start / Main-Secondary Camera Selection.

· With the monitor on standby,
the monitor on manually. To activate the audio, press the audio activation button
· With video, press and hold this button for 2 seconds to sequentially select between the
main camera and the secondary camera (where one exists).
· In this case auto-start can be performed by the:
o Wildcard button
o By pressing the direct access button or
o By selecting the icon of the auto-start function on the menu

Lock Releases / Call Guard Unit Button.

· Pressing this button whilst communicating with the Entry
Panel will activate the lock releases. The corresponding
icon will appear on the monitor.
· Pressing this button whilst the monitor is on standby will
result in a call being made to the guard unit(where one
exists). If the channel is busy an error tone "BEEP" will
be generated and the call is not made.
Button Menu: Adjustments and confi guration.
· To access the Administrator menu and the User menu. From each of these you can access
the different customised adjustments.
Cod.97712 V08/13
BASIC SMILE VDS MONITOR
menu
audio
(the user has 30" seconds to answer before returning to standby. During
, this works with handsfree.
(upon completion the blue led audio light turns off again).
press and hold the wildcard button
or
Via the MENU. (Pressing
"Menu" for 3 seconds
Shortcut buttons
(Short press "Menu"
wildcard
lock-
releases
).
).
1
press this button
(the blue led on
for 1 second to switch
.
.
ENGLISH