Fermax Duox Veo XS Installer Manual page 40

4.4 USER MENU: F2 FUNCTION
The F2 function sends an activation command to activate an auxiliary device.
An on-screen notifi cation of the action will be shown: F2 ON for 3 seconds.
This function is contained in the main screen of the user menu.
The F2 command is sent by the bus, including the monitor address, to activate the auxiliary
devices connected to the bus, such as for example a duox relay, (check with your installer).
4.5 USER MENU: USER PARAMETER SETTINGS
Within the user menu, selecting the option "User parameter settings"
new screen corresponding to the various confi guration parameters:
16
DUOX VEO XS AMBIANCE MONITOR
The parameters are the following:
1. Melody selection
2. Date and time settings
3. Enable/disable image capture
4. Reset the confi guration parameters
5. User help
6. Enable/Disable Doormatic
Note: In this screen you can see the Doormatic
parameter enabled.
, will access a