Operation - Midea FP-90LTL085GETM-N1 User Manual

Put detergent into
its case
Put down the drain
hose.
Select the proper water level and other settings, as desired.
Press the Start/ Pause button
End of Program
When the operation stops, the buzzer will sound continuously 6 times and
then the power will be automatically cut off.
Turn off the water tap.
Although the power will be cut off automatically, the power plug must still be pulled
out from the socket, for safety.
Press the
Start/Pause button
Plug into power supply

Operation

NORMAL Wash Program
The Normal wash program is the easiest, most convenient, and most common washing
program. The user presses the power switch, presses the Start/Pause button, and the
Normal washing program will start to work.
Procedure
1.Press the power switch.
2.Choose the appropriate water level, based on the wash load.
3.Press Start/Pause button.
Wash Program Customization
Users can freely set a variety of combinations for water level, wash time, number of rinses,
and spin time, depending on their need.
Manual Setting Options
For Spin only
1.Press the Power button.
2.Press the Spin button to choose the spin time.
3.Press the Start/Pause button.
The washing machine will operate a single spin process.
For Wash only
1.Press the Power button.
2.Repeatedly press the spin button until the indicator light goes out. Press the Wash
button to choose the wash time.
3.Press the Start/Pause button.
The washing machine will operate a single wash process.
For Wash and Rinse
1.Press the Power button.
2.Repeatedly press the Spin button until the indicator light goes out. Press the Rinse
button and the Wash button to choose the setting desired.
3.Press the Start/Pause button.
The washing machine will operate the 'wash and rinse' process. For other process
combinations, just choose the desired settings for water level, wash time, number of
rinses, and spin time, then press the Start/Pause button.
！
Close the lid when machine is running, otherwise, it will automatically
！
stop working during the spin process and sound off a warning.
The washer will not work when water does not reach the set water level.
！
NOTE